What name of module should i look for?

I'm trying to manipulate gpios, but getting this message:

===============
root@flashrom:/sys/class/gpio# echo 3 > /sys/class/gpio/export
bash: echo: write error: Invalid argument
===============

Might it be releated to dmesg info:

===============
[    7.508264] ACPI Warning: 0x00000430-0x00000433 SystemIO conflicts with Regio
n \SPEN 1 (20120320/utaddress-251)
[    7.508295] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[    7.508302] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[    7.508320] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[    7.548511] ppdev: user-space parallel port driver
===============

I have no idea what to do.

GPIO uninitialised is not for this machine only.

Just wanted to inform, ill try to find some answers, but any help would be aprecieted.

Is it possible we can not do anything beacose of GPIO interface problems?

Best regards!

2013/10/2 Stefan Tauner <stefan.tauner@student.tuwien.ac.at>

On Tue, 1 Oct 2013 20:39:12 +0200
san <san@plusnet.pl> wrote:

> Hi again!
>
> I'm trying to "Try & Error method on GPIO pins" but not sure what to do:
>
> ======================
> san@flashrom:~$ lspci | grep ISA
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
> Bridge (rev 02)
> ======================
>
> seems to be fine, but can not find anything usefull at:
>
> ======================
> san@flashrom:~$ cat /proc/ioports
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-0060 : keyboard
> 0064-0064 : keyboard
> 0070-0073 : rtc0
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:1f.1
>   0170-0177 : ata_piix
> 01f0-01f7 : 0000:00:1f.1
>   01f0-01f7 : ata_piix
> 0294-0297 : pnp 00:01
> 0376-0376 : 0000:00:1f.1
>   0376-0376 : ata_piix
> 0378-037a : parport0
> 03f2-03f2 : floppy
> 03f4-03f5 : floppy
> 03f6-03f6 : 0000:00:1f.1
>   03f6-03f6 : ata_piix
> 03f7-03f7 : floppy
> 03f8-03ff : serial
> 0400-04bf : pnp 00:0a
>   0400-0403 : ACPI PM1a_EVT_BLK
>   0404-0405 : ACPI PM1a_CNT_BLK
>   0408-040b : ACPI PM_TMR
>   0428-042f : ACPI GPE0_BLK
> 04d0-04d1 : pnp 00:01
> 0500-051f : 0000:00:1f.3
> 0a78-0a7b : pnp 00:01
> 0b78-0b7b : pnp 00:01
> 0bbc-0bbf : pnp 00:01
> 0cf8-0cff : PCI conf1
> 0e78-0e7b : pnp 00:01
> 0f78-0f7b : pnp 00:01
> 0fbc-0fbf : pnp 00:01
> a000-afff : PCI Bus 0000:02
>   a000-a0ff : 0000:02:02.0
>     a000-a0ff : 8139too
> b000-b01f : 0000:00:1d.1
>   b000-b01f : uhci_hcd
> b400-b41f : 0000:00:1d.2
>   b400-b41f : uhci_hcd
> b800-b81f : 0000:00:1d.3
>   b800-b81f : uhci_hcd
> bc00-bc1f : 0000:00:1d.0
>   bc00-bc1f : uhci_hcd
> c000-c007 : 0000:00:1f.2
>   c000-c007 : ata_piix
> c400-c403 : 0000:00:1f.2
>   c400-c403 : ata_piix
> c800-c807 : 0000:00:1f.2
>   c800-c807 : ata_piix
> cc00-cc03 : 0000:00:1f.2
>   cc00-cc03 : ata_piix
> d000-d00f : 0000:00:1f.2
>   d000-d00f : ata_piix
> d800-d8ff : 0000:00:1f.5
>   d800-d8ff : Intel ICH5
> dc00-dc3f : 0000:00:1f.5
>   dc00-dc3f : Intel ICH5
> f000-f00f : 0000:00:1f.1
>   f000-f00f : ata_piix
>
> ======================

No idea why the GPIO function is not found in the ioports... probably
you need to load a module for it that is not loaded automatically.


The interesting part of your binary that (probably) disables the write
protection is disassembled here:
http://paste.flashrom.org/view.php?id=1772

The head of the function 5E1F is done by flashrom already (setting
BIOS_CNTL). Starting with 5E2C it calculates the offset of the GPIO
registers mapped on PMBASE (5E77 stores a part of PMBASE in dx).

So you can either continue with the trial and error method or try to
understand the code the vendor tool would execute.

--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner

--
[ e-San.info | San@plusnet.pl ]