Please help me with my bios chip. I am getting an error when I reprogram my bios chip using flashrom. I have already tried using different versions of AsProgrammer and CH341 Mini Programmer but still unable to verify the new rom. My Chip is an 8 pin and is removable (W25Q64BVAIG).
You may refer to the command below. I hope you can help me.
C:\Users\SKyFlaKes™\Downloads\Compressed\flashrom>flashrom
flashrom v1.2-50-gc19aa5e on Windows 6.2 (x86_64)
flashrom is free software, get the source code at
https://flashrom.orgCalibrating delay loop... OK.
Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi.
No operations were specified.
C:\Users\SKyFlaKes™\Downloads\Compressed\flashrom>flashrom -w MAXIMUS-IV-GENE-Z-GEN3-ASUS-3603.ROM
flashrom v1.2-50-gc19aa5e on Windows 6.2 (x86_64)
flashrom is free software, get the source code at
https://flashrom.orgCalibrating delay loop... OK.
Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00180004! Expected=0x00, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0xf364
Your flash chip is in an unknown state.
Please report this on IRC at
chat.freenode.net (channel #flashrom) or
mail
flashrom@flashrom.org, thanks!