flashrom v0.9.4-r1457 on Linux 2.6.32-71.el6.i686 (i686), built with libpci 3.1.4, GCC 4.4.4 20100726 (Red Hat 4.4.4-13), little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 2 usecs, 889M loops per second, 10 myus = 12 us, 100 myus = 100 us, 1000 myus = 994 us, 10000 myus = 9976 us, 8 myus = 10 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System Manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "NF-M2S"
DMI string baseboard-product-name: "www.abit.com.tw  "
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8726 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. 
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to flashrom@flashrom.org including a
verbose (-V) log. Thank you!
Enabling flash write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0x00000000
MCP SPI is not used.
Please send the output of "flashrom -V" to flashrom@flashrom.org with
your board name: flashrom -V as the subject to help us finish support for your
chipset. Thanks.
OK.
This chipset supports the following protocols: LPC.
Super I/O ID 0x8726 is not on the list of flash capable controllers.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x89, id2 0x74, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Found Winbond flash chip "W39V040C" (512 kB, LPC) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
Found Winbond flash chip "W39V040C" (512 kB, LPC).
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88