Hi,

last night I flashed my MSI H67MA-ED55(B3) with E7676IMS170. As the name says Intel  H67 is the  built in chipset. Flash chip is W25Q64. The flash process worked fine for me.

Two things are a bit strange. Currently I try to investigate the reasons for. Perhaps you have any suggestions.

1. Sys fans cannot longer be controlled, because according BIOS parameters are not longer accessible. Currently I don’t know how to get them back.

2. After cold booting the disabled “Full Screen Logo Display” is enabled again. It seems to be the default. But other boot parameter are not changed back to default.

I attached the result of “flashrom -V” (result.txt).

I hope results are detailed enough to switch entry H67 in your hardware list  onto tested.

Best regards,

Peter