Hi,
I have an Epyc 2nd gen (Rome) system and I am getting this error:
portable ~ # flashrom --programmer internal
flashrom v1.2 on Linux 6.1.19-gentoo-x86_64 (x86_64)
flashrom is free software, get the source code at
https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1,
resolution: 1ns).
No DMI table found.
Found chipset "AMD FP4".
Enabling flash write... FCH device found but SMBus
revision 0x61 does not match known values.
Please report this to flashrom@flashrom.org and include
this log and
the output of lspci -nnvx, thanks!.
Could not determine chipset generation.PROBLEMS,
continuing anyway
========================================================================
You may be running flashrom on an unknown laptop. We
could not
detect this for sure because your vendor has not set up
the SMBIOS
tables correctly. Some internal buses have been disabled
for
safety reasons. You can enforce using all buses by adding
-p internal:laptop=this_is_not_a_laptop
to the command line, but please read the following
warning if you
are not sure.
Laptops, notebooks and netbooks are difficult to support
and we
recommend to use the vendor flashing utility. The
embedded controller
(EC) in these machines often interacts badly with
flashing.
See the manpage and https://flashrom.org/Laptops for
details.
If flash is shared with the EC, erase is guaranteed to
brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan
failure, backlight
failure and sudden poweroff.
You have been warned.
========================================================================
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't
found automatically.
Thanks for looking into it,
Daniel