After run flashrom -p internal have error:

=========================================================================

flashrom v0.9.7-r1763 on Linux 2.6.32-5-486 (i686)

flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.

coreboot table found at 0x9fe1c00.

Found chipset "Intel PIIX4/4E/4M". Enabling flash write... OK.

Enabling full flash access for board "abit BF6"...

ERROR: PIIX4 GPO26 not programmed for output.

FAILED!

Aborting to be safe.

Error: Programmer initialization failed.

How resolve this problem?