On 14.05.2010 15:51, Stefan Reinauer wrote:
On 5/14/10 3:06 PM, Michael Karcher wrote:
Am Freitag, den 14.05.2010, 14:48 +0200 schrieb Stefan Reinauer:
On 4/16/10 6:21 PM, Stefan Reinauer wrote:
Look at the return value of wait_82802ab() Index: sst49lfxxxc.c =================================================================== --- sst49lfxxxc.c (revision 993) +++ sst49lfxxxc.c (working copy) @@ -84,6 +84,7 @@ chip_writeb(0xD0, bios + address); status = wait_82802ab(bios);
[...] basically a good idea, but printing one status dump per erased block seems a bit excessive, even in verbose mode, as there are some chips with 4K sector size. Could you limit status printing to "status != 0x80", as this is "ready, no error bits"?
That's what the 82802ab and sharp lhf00l04 do, too. So if you think the behavior should be changed, you should change it in all three places.
That's the plan.