flashrom v0.9.2-r1091 on Linux 2.6.32-trunk-686 (i686), built with libpci 3.1.7, GCC 4.4.4, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 5 usecs, 89M loops per second, 10 myus = 14 us, 100 myus = 104 us, 1000 myus = 1066 us, 10000 myus = 10103 us, 20 myus = 25 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System Manufacturer"
DMI string system-product-name: "System Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P2E-M"
DMI string baseboard-version: "REV 1.xx"
DMI string chassis-type: "Unknown"
Found chipset "Intel PIIX4/4E/4M", enabling flash write... chipset PCI ID is 8086:7110, OK.
This chipset supports the following protocols: Parallel.
Probing for Winbond W29EE011, 128 KB: probe_w29ee011: id1 0xda, id2 0xc1
Found chip "Winbond W29EE011" (128 KB, Parallel) at physical address 0xfffe0000.
===
This flash part has status UNTESTED for operations: ERASE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
Reading flash... done.