flashrom v0.9.0-r631 No coreboot table found. Found chipset "Intel ICH7/ICH7R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x20464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x0004 (SPIS) 0x02: 0x7f10 (SPIC) 0x04: 0x0007ffc0 (SPIA) 0x08: 0x0000004d (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x0000471d (SPID1+4) 0x18: 0x50120000 (SPID2) 0x1c: 0x00495100 (SPID2+4) 0x20: 0x00000100 (SPID3) 0x24: 0x00000040 (SPID3+4) 0x28: 0x30363041 (SPID4) 0x2c: 0x30303035 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00ffaaea (SPID6) 0x3c: 0x2f3130f0 (SPID6+4) 0x40: 0x302f3432 (SPID7) 0x44: 0x00fc0037 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x0006 (PREOP) 0x56: 0x463b (OPTYPE) 0x58: 0x05d80302 (OPMENU) 0x5c: 0xc79f0190 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3) Programming OPCODES... program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. Calibrating delay loop... 529M loops per second, 100 myus = 199 us. OK. Probing for SST SST25VF040B, 512 KB: RDID returned 0xbf 0x25 0x8d probe_spi_rdid_generic: id1 0xbf, id2 0x258d Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Resulting block protection : none Found chip "SST SST25VF040B" (512 KB) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom@coreboot.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... VERIFIED.