I am getting this error message when i attempt to re-flash the bricked bios of this motherboard.  Any help would be greatly appreciated!


e6410 Test # flashrom -p serprog:dev=/dev/ttyACM0:2000000 -w HIB_716.ROM
flashrom v0.9.7-r1764 on Linux 3.2.0-4-486 (i686)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
serprog: Programmer name is "serprog-duino"
Found Winbond flash chip "W25Q16.V" (2048 kB, SPI) on serprog.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00000fff: 0x1000
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: 0x8000
ERASE FAILED!
Reading current flash chip contents... Error: invalid response 0x00 from device
Can't read anymore! Aborting.
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Error: invalid response 0x00 from device
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org, thanks!