Am 03.08.2014 um 21:28 schrieb Stefan Tauner:
On Thu, 19 Jun 2014 15:36:11 +0200 The Raven originalraven@hotmail.com wrote:
Hello, this chip is marked as "untested" in write mode. So here are my test-results:
Erase in d8-Mode is not working (see log). But i think it's the already known "serprog bug". Erase in c7-mode is ok.
Write is working in both modes. But i don't know why in c7-mode the log shows: 0x000000-0x007fff:W, 0x008000-0x00ffff:S, 0x010000-0x017fff:S, 0x018000-0x01ffff:S
I have created the test-file with dd and urandom. The file (131072 byte) is full with data. So it should write (W) not only to 0x007fff. Strange!
If you need more logs or infos, let me know.
BTW: The chip is labeled "25P10VP". I see nothing with "-A". And the chip was found on a "Maxtor" hard disk drive.
That is indeed very strange and I have only one plausible theory about that: This could happen if erasing the first block worked fine while flashrom failed afterwards. If then the same contents (as were on the chip before the erase) would be written, only the first block would have to be rewritten. And since your erase had exactly that characteristic of failing at the second block this might be the case depending on the order and data of your actions.
Could you reproduce that problem? Were you reusing the random file or have you recreated it between writes?
Hello,
Now i have realized that i made it wrong! The test is done in d8 mode and NOT in c7! Chip is working very well in c7 mode. But in d8 -> no chance! Erase and programming (which had worked last time i tested, but maybe not correct?!) fails now always. But i am still not sure if it's a problem of serprog.
This is the output when trying to write in d8-mode:
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x007fff:EWError: invalid response 0x12 from device spi_nbyte_program failed during command execution at address 0x0 Reading current flash chip contents... Error: invalid response 0xE6 from device Can't read anymore! Aborting. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... Error: invalid response 0x80 from device Can't even read anymore! Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!