flashrom v0.9.2-r1028 on Linux 2.6.35-24-generic (x86_64), built with libpci 3.0.0, GCC 4.4.4, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1393M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 995 us, 10000 myus = 10247 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "ASRock"
DMI string baseboard-product-name: "K10N78"
DMI string baseboard-version: "                      "
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP78S", enabling flash write... chipset PCI ID is 10de:075c, This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Guessed flash bus type is SPI
Found SMBus device 10de:0752 at 00:01:1
SPI BAR is at 0xf9e80000, after clearing low bits BAR is at 0xf9e80000
SPI control is 0xc05a, enable=0, idle=0
Please send the output of "flashrom -V" to flashrom@flashrom.org to help us finish support for your chipset. Thanks.
SPI on this chipset is not supported yet.
OK.
This chipset supports the following protocols: None.

No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.