Thanks for the information. I will give it a try next time. The executable looks much larger than the 0.9.6.1 I have (728KB vs. 200-ish KB). I have been using flashrom with a bootable floppy disk most of the time so 700+KB seems a little too gigantic. Maybe it's time for me to dust off my old zip drives :)


Lu

From: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Sent: Sunday, December 4, 2016 6:01:38 PM
To: Lu Xie
Cc: flashrom@flashrom.org
Subject: Re: [flashrom] Any chance of getting Flashrom 0.9.8 for DOS?
 
On Sun, 4 Dec 2016 20:59:12 +0000
Lu Xie <firexl@hotmail.com> wrote:

> Hi,
>
> I have been quite happy with the 0.9.6.1 release for DOS and I decided to get a newer version. I tried several compiled executables from the buildbot repository but they are all unstable. I did a search in the wayback machine and found that 0.9.8 was the last stable release that had a DOS executable stored outside the buildbot repository, but the link (http://ra.openbios.org/~idwer/flashrom/dos/) seems to be dead. I googled for hours but couldn't find a copy of a 0.9.8 DOS executable. Could you please send me a copy of it from your archive or repository? Thanks.
>
> Lu

Hello Lu,

we may host pre-built binaries for less open-oriented systems in the
future again and will change the respective links on our website. For
now you can use the files located here
http://buildbot.flashrom.org/buildresults/flashrom-000577-MQE/dos/
They use the source code of 0.9.9.

--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner