Author: hailfinger Date: 2009-11-23 20:20:11 +0100 (Mon, 23 Nov 2009) New Revision: 771
Added: trunk/serial.c Modified: trunk/Makefile trunk/flash.h trunk/serprog.c Log: Move serial handling from serprog.c to serial.c. This is the first step in enabling platform independent serprog and it also allows other drivers to use serial port functionality without requiring serprog.
Pure code move, no code changed.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2009-11-23 12:55:31 UTC (rev 770) +++ trunk/Makefile 2009-11-23 19:20:11 UTC (rev 771) @@ -138,6 +138,10 @@ OBJS += drkaiser.o endif
+ifeq ($(CONFIG_SERPROG), yes) +OBJS += serial.o +endif + ifeq ($(CONFIG_PRINT_WIKI), yes) FEATURE_CFLAGS += -D'PRINT_WIKI_SUPPORT=1' OBJS += print_wiki.o
Modified: trunk/flash.h =================================================================== --- trunk/flash.h 2009-11-23 12:55:31 UTC (rev 770) +++ trunk/flash.h 2009-11-23 19:20:11 UTC (rev 771) @@ -736,8 +736,11 @@ uint8_t serprog_chip_readb(const chipaddr addr); void serprog_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); void serprog_delay(int delay); + +/* serial.c */ void sp_flush_incoming(void); int sp_openserport(char *dev, unsigned int baud); +void __attribute__((noreturn)) sp_die(char *msg); extern int sp_fd;
#endif /* !__FLASH_H__ */
Added: trunk/serial.c =================================================================== --- trunk/serial.c (rev 0) +++ trunk/serial.c 2009-11-23 19:20:11 UTC (rev 771) @@ -0,0 +1,142 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2009 Urja Rannikko urjaman@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include "flash.h" +#include <string.h> +#include <ctype.h> +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <errno.h> +#include <inttypes.h> +#include <termios.h> + +int sp_fd; + +void __attribute__((noreturn)) sp_die(char *msg) +{ + perror(msg); + exit(1); +} + +struct baudentry { + int flag; + unsigned int baud; +}; + +/* I'd like if the C preprocessor could have directives in macros */ +#define BAUDENTRY(baud) { B##baud, baud }, +static const struct baudentry sp_baudtable[] = { + BAUDENTRY(9600) + BAUDENTRY(19200) + BAUDENTRY(38400) + BAUDENTRY(57600) + BAUDENTRY(115200) +#ifdef B230400 + BAUDENTRY(230400) +#endif +#ifdef B460800 + BAUDENTRY(460800) +#endif +#ifdef B500000 + BAUDENTRY(500000) +#endif +#ifdef B576000 + BAUDENTRY(576000) +#endif +#ifdef B921600 + BAUDENTRY(921600) +#endif +#ifdef B1000000 + BAUDENTRY(1000000) +#endif +#ifdef B1152000 + BAUDENTRY(1152000) +#endif +#ifdef B1500000 + BAUDENTRY(1500000) +#endif +#ifdef B2000000 + BAUDENTRY(2000000) +#endif +#ifdef B2500000 + BAUDENTRY(2500000) +#endif +#ifdef B3000000 + BAUDENTRY(3000000) +#endif +#ifdef B3500000 + BAUDENTRY(3500000) +#endif +#ifdef B4000000 + BAUDENTRY(4000000) +#endif + {0, 0} /* Terminator */ +}; + +int sp_openserport(char *dev, unsigned int baud) +{ + struct termios options; + int fd, i; + fd = open(dev, O_RDWR | O_NOCTTY | O_NDELAY); + if (fd < 0) + sp_die("Error: cannot open serial port"); + fcntl(fd, F_SETFL, 0); + tcgetattr(fd, &options); + for (i = 0;; i++) { + if (sp_baudtable[i].baud == 0) { + close(fd); + fprintf(stderr, + "Error: cannot configure for baudrate %d\n", + baud); + exit(1); + } + if (sp_baudtable[i].baud == baud) { + cfsetispeed(&options, sp_baudtable[i].flag); + cfsetospeed(&options, sp_baudtable[i].flag); + break; + } + } + options.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS); + options.c_cflag |= (CS8 | CLOCAL | CREAD); + options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); + options.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR); + options.c_oflag &= ~OPOST; + tcsetattr(fd, TCSANOW, &options); + return fd; +} + +void sp_flush_incoming(void) +{ + int i; + for (i=0;i<100;i++) { /* In case the device doesnt do EAGAIN, just read 0 */ + unsigned char flush[16]; + ssize_t rv; + rv = read(sp_fd, flush, sizeof(flush)); + if ((rv == -1) && (errno == EAGAIN)) + break; + if (rv == -1) + sp_die("flush read"); + } + return; +}
Modified: trunk/serprog.c =================================================================== --- trunk/serprog.c 2009-11-23 12:55:31 UTC (rev 770) +++ trunk/serprog.c 2009-11-23 19:20:11 UTC (rev 771) @@ -61,8 +61,6 @@ #define S_CMD_Q_RDNMAXLEN 0x11 /* Query read-n maximum length */ #define S_CMD_S_BUSTYPE 0x12 /* Set used bustype(s). */
-int sp_fd; - static uint16_t sp_device_serbuf_size = 16; static uint16_t sp_device_opbuf_size = 300; /* Bitmap of supported commands */ @@ -95,12 +93,6 @@ whether the command is supported before doing it */ static int sp_check_avail_automatic = 0;
-static void __attribute__((noreturn)) sp_die(char *msg) -{ - perror(msg); - exit(1); -} - static int sp_opensocket(char *ip, unsigned int port) { int flag = 1; @@ -130,108 +122,6 @@ return sock; }
-struct baudentry { - int flag; - unsigned int baud; -}; - -/* I'd like if the C preprocessor could have directives in macros */ -#define BAUDENTRY(baud) { B##baud, baud }, -static const struct baudentry sp_baudtable[] = { - BAUDENTRY(9600) - BAUDENTRY(19200) - BAUDENTRY(38400) - BAUDENTRY(57600) - BAUDENTRY(115200) -#ifdef B230400 - BAUDENTRY(230400) -#endif -#ifdef B460800 - BAUDENTRY(460800) -#endif -#ifdef B500000 - BAUDENTRY(500000) -#endif -#ifdef B576000 - BAUDENTRY(576000) -#endif -#ifdef B921600 - BAUDENTRY(921600) -#endif -#ifdef B1000000 - BAUDENTRY(1000000) -#endif -#ifdef B1152000 - BAUDENTRY(1152000) -#endif -#ifdef B1500000 - BAUDENTRY(1500000) -#endif -#ifdef B2000000 - BAUDENTRY(2000000) -#endif -#ifdef B2500000 - BAUDENTRY(2500000) -#endif -#ifdef B3000000 - BAUDENTRY(3000000) -#endif -#ifdef B3500000 - BAUDENTRY(3500000) -#endif -#ifdef B4000000 - BAUDENTRY(4000000) -#endif - {0, 0} /* Terminator */ -}; - -int sp_openserport(char *dev, unsigned int baud) -{ - struct termios options; - int fd, i; - fd = open(dev, O_RDWR | O_NOCTTY | O_NDELAY); - if (fd < 0) - sp_die("Error: cannot open serial port"); - fcntl(fd, F_SETFL, 0); - tcgetattr(fd, &options); - for (i = 0;; i++) { - if (sp_baudtable[i].baud == 0) { - close(fd); - fprintf(stderr, - "Error: cannot configure for baudrate %d\n", - baud); - exit(1); - } - if (sp_baudtable[i].baud == baud) { - cfsetispeed(&options, sp_baudtable[i].flag); - cfsetospeed(&options, sp_baudtable[i].flag); - break; - } - } - options.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS); - options.c_cflag |= (CS8 | CLOCAL | CREAD); - options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); - options.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR); - options.c_oflag &= ~OPOST; - tcsetattr(fd, TCSANOW, &options); - return fd; -} - -void sp_flush_incoming(void) -{ - int i; - for (i=0;i<100;i++) { /* In case the device doesnt do EAGAIN, just read 0 */ - unsigned char flush[16]; - ssize_t rv; - rv = read(sp_fd, flush, sizeof(flush)); - if ((rv == -1) && (errno == EAGAIN)) - break; - if (rv == -1) - sp_die("flush read"); - } - return; -} - static int sp_sync_read_timeout(int loops) { int i;