Hi,

I have been flashing Macronix SPI with device ID MX25L12805D. We now have a new Numonyx SPI with device ID N25Q128..3E. However, when I try to flash the device it says that no flash device was found. But when I do the –p internal it clearly shows the device ID N25Q128..3E

 

I have attached the verbose output from when I ran the command. I appreciate any assistance that you can provide.

 

Thank you.

 

Stephen Burks

Manager, Manufacturing Engineering - USA

Manufacturing Engineering and Material Data Management

Kontron

14118 Stowe Drive | Poway, CA 92064 | USA

P: + 1 (858) 677-0877 x3266 | M: + 1 (858) 699-4690

Steve.Burks@us.kontron.com


Website | Blog | Twitter | LinkedIn | YouTube | Facebook

Kontron America

Please find our mandatory legal statements here.

By opening this email you are agreeing to Kontron's Electronic Communications Policy.

 


WARNING - This e-mail or its attachments may contain controlled technical data or controlled technology within the definition of the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR), and are subject to the export control laws of the U.S. Government. Transfer of this data or technology by any means to a foreign person, whether in the United States or abroad, without an export license or other approval from the U.S. Government, is prohibited. The information contained in this document is CONFIDENTIAL and property of Kontron. Any unauthorized review, use, disclosure or distribution is prohibited without express written consent of Kontron. If you are not the intended recipient, please contact the sender and destroy all copies of the original message and enclosed attachments.   ­­