Am Dienstag, den 24.08.2010, 09:14 -0400 schrieb pat-lkml:
On 8/23/2010 7:24 PM, Paul Menzel wrote:
Am Montag, den 23.08.2010, 19:06 -0400 schrieb pat-lkml@erley.org:
Can anything be divined from this?
flashrom v0.9.2-r1001 on Linux 2.6.35-std160-i386 (i686), built with libpci 3.1.4, GCC 4.4.4
flashrom is free software, get the source code at http://www.flashrom.org
Could you please try the latest flashrom from svn [1]?
What distribution do you use? What is the exact product name of your
motherboard (a URL would be nice)?
Well, it worked with the latest svn!
That is what I thought.
The exact product, as far as I know, is the ECS M825G v9.2
http://pcchipsusa.com/prod-m825gv92a.asp
I don't know what the stock flash chip is right off, as after booting,
I swapped in an AMIC A29040B. It failed to fully flash this, but that
was due to the AMIC chip being 512KB, while the stock flash was 256KB.
Flashrom did detect this, and warned that it wasn't likely to work.
I was running this from a live CD, System Rescue CD Specifically. The
motherboard is 80% dead at this point (no working IDE, booted USB CD).
Interesting. If you have some time left, it would be great if you could
reply and attach the flashrom output with the latest revision for the
archive.
Will Try. When it freezes at 50%, it deadlocks the system, which
may lead to problems as the only target I have for saving the logs
is USB (with it's nasty delayed writing, even when not mounted
async).