flashrom v0.9.5.2-r1546 on Linux 3.2.0-4-amd64 (x86_64)

flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.7, GCC 4.6.2, little endian

Command line (1 args): flashrom -V

Calibrating delay loop... OS timer resolution is 1 usecs, 866M loops per second, 10 myus = 11 us, 100 myus = 101 us,

 1000 myus = 1000 us, 10000 myus = 10021 us, 4 myus = 5 us, OK.

Initializing internal programmer

No coreboot table found.

DMI string system-manufacturer: "Shuttle Inc"

DMI string system-product-name: "SN68S"

DMI string system-version: "V10"

DMI string baseboard-manufacturer: "Shuttle Inc"

DMI string baseboard-product-name: "FN68S"

DMI string baseboard-version: "V10"

DMI string chassis-type: "Desktop"

Found ITE Super I/O, ID 0x8716 on port 0x2e

Found chipset "NVIDIA MCP67" with PCI ID 10de:0548. Enabling flash write... This chipset is not really supported yet

. Guesswork...

ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0

Flash bus type is LPC

Found SMBus device 10de:0542 at 00:01:1

MCP SPI BAR is at 0x00000000

MCP SPI is not used.

Please send the output of "flashrom -V" to flashrom@flashrom.org with

your board name: flashrom -V as the subject to help us finish support for your

chipset. Thanks.

OK.

No IT87* serial flash segment enabled.

The following protocols are supported: LPC.

Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x99, id2 0x32, id1 parity violation, id1 is normal flash co

ntent, id2 is normal flash content

Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH) at physical address 0xfff80000.

Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_je

dec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash c

ontent, id2 is normal flash content

Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal fla

sh content

Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal fla

sh content

Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash con

tent, id2 is normal flash content

Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash con

tent, id2 is normal flash content

Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash cont

ent, id2 is normal flash content

Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal f

lash content, id2 is normal flash content

Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e

Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH).

No operations were specified.

Restoring PCI config space for 00:01:0 reg 0x6d

Restoring PCI config space for 00:01:0 reg 0x90

Restoring PCI config space for 00:01:0 reg 0x8c

Restoring PCI config space for 00:01:0 reg 0x88