Hi,
I tried your script and the flashing has failed on my chromebook spin 713.
I am stucked and can not turn my chromebook off or reboot.
Please help!!!
Best regards
Dan.
Here are the details:
flashrom bc6a1b93 on Linux 4.19.268-14368-gaeea1ff85784 (x86_64)Hardware sequencing reports 1 attached SPI flash chip with a density of 16384 kB.There is only one partition containing the whole address space (0x000000 - 0xffffff).There are 4096 erase blocks with 4096 B each.Added layout entry 00000000 - 00ffffff named complete flashFound Winbond flash chip "W25Q128.V..M" (16384 kB, Programmer-specific) on internal.Found Winbond flash chip "W25Q128.V..M" (16384 kB, Programmer-specific).This chip may contain one-time programmable memory. flashrom cannot readand may never be able to write it, hence it may not be able to completelyclone the contents of this chip (see man page for details).Reading Status registerHSFC: FGO=1, FCYCLE=8, WET=0, FDBC=0, SME=0Block protection is disabled.Reading ich descriptor... read_flash: Flash Descriptor region (00000000..0x000fff) is readable, reading range (00000000..0x000fff).Reading 4096 bytes starting at 0x000000.HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0
...
HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0
...
done.Assuming chipset '300 series Cannon Point'.Added layout entry 00000000 - 00000fff named fdAdded layout entry 00400000 - 00ffffff named biosAdded layout entry 00001000 - 003fffff named merestore_power_management: Re-enabling power management.Using region: "bios".Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.disable_power_management: Disabling power management.Reading Status registerHSFC: FGO=1, FCYCLE=8, WET=0, FDBC=0, SME=0Block protection is disabled.Reading old flash chip contents... read_flash: BIOS region (0x400000..0xffffff) is readable, reading range (0x400000..0xffffff).Reading 12582912 bytes starting at 0x400000.HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0
...
HSFC: FGO=1, FCYCLE=0, WET=0, FDBC=63, SME=0done.fix_erasers_if_needed: kept eraser at 0fill_sorted_erasers: found 1 valid erasersad0000..ad1fff 1000 x 2 eraser 0ae0000..ae1fff 1000 x 2 eraser 0af0000..af0fff 1000 x 1 eraser 0af4000..af5fff 1000 x 2 eraser 0af8000..af8fff 1000 x 1 eraser 0afa000..afafff 1000 x 1 eraser 0b00000..bfafff 1000 x 251 eraser 0bff000..bfffff 1000 x 1 eraser 0c04000..d09fff 1000 x 262 eraser 0d0e000..e1cfff 1000 x 271 eraser 0ff3000..ffffff 1000 x 13 eraser 0Erasing and writing flash chip... 0xad0000-0xad0fff: EErasing 4096 bytes starting at 0xad0000.HSFC: FGO=1, FCYCLE=3, WET=0, FDBC=0, SME=0Transaction error between offset 0x00ad0000 and 0x00ad0000 (= 0x00ad0000 + 0)!HSFS: FDONE=1, FCERR=1, AEL=0, SCIP=0, PRR34_LOCKDN=0, WRSDIS=0, FDOPSS=1, FDV=1, FLOCKDN=1HSFC: FGO=0, FCYCLE=3, WET=0, FDBC=0, SME=0 ERASE_FAILEDFAILED!Uh oh. Erase/write failed. Your flash chip is in an unknown state.Get help on IRC (see https://www.flashrom.org/Contact) or mailflashrom@flashrom.org with the subject "FAILED: <your board name>"!-------------------------------------------------------------------------------DO NOT REBOOT OR POWEROFF!restore_power_management: Re-enabling power management.FAILEDRestoring PCI config space for 00:1f:5 reg 0xdcAn error occurred flashing the Full ROM firmware. DO NOT REBOOT!