[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic-pae (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 (Ubuntu 2.6.32-24.39-generic-pae 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 100000000 mask FE0000000 write-back [ 0.000000] 1 base 120000000 mask FF0000000 write-back [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 0C0000000 mask FF0000000 write-back [ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37861000 - 37fef5e0 [ 0.000000] Allocated new RAMDISK: 0093f000 - 010cd5e0 [ 0.000000] Move RAMDISK from 0000000037861000 - 0000000037fef5df to 0093f000 - 010cd5df [ 0.000000] ACPI: RSDP 000f78e0 00014 (v00 IntelR) [ 0.000000] ACPI: RSDT cfee3000 00034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP cfee3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT cfee3100 04EC3 (v01 INTELR AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS cfee0000 00040 [ 0.000000] ACPI: MCFG cfee80c0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC cfee8000 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT cfee8a20 00380 (v01 PmRef CpuPm 00003000 INTL 20041203) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3974MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00012000 - 00018f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00009367f8] TEXT DATA BSS ==> [0000100000 - 00009367f8] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000937000 - 000093e112] BRK ==> [0000937000 - 000093e112] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000093f000 - 00010cd5e0] NEW RAMDISK ==> [000093f000 - 00010cd5e0] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f3960] f3960 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] free_area_init_node: node 0, pgdat c07d8d80, node_mem_map c10cf200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7949 pages used for memmap [ 0.000000] HighMem zone: 812501 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3800000 s39480 r0 d21960 u524288 [ 0.000000] pcpu-alloc: s39480 r0 d21960 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038446 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic-pae root=UUID=fd2ea6c3-4b13-4a1f-8ee8-c8bb540af56e ro vga=799 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 24903360 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00130000) [ 0.000000] Memory: 4111024k/4980736k available (4832k kernel code, 80544k reserved, 2221k data, 676k init, 3281800k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07e4000 - 0xc088d000 ( 676 kB) [ 0.000000] .data : 0xc05b821b - 0xc07e3828 (2221 kB) [ 0.000000] .text : 0xc0100000 - 0xc05b821b (4832 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3402.634 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6805.26 BogoMIPS (lpj=13610536) [ 0.004014] Security Framework initialized [ 0.004029] AppArmor: AppArmor initialized [ 0.004034] Mount-cache hash table entries: 512 [ 0.004117] Initializing cgroup subsys ns [ 0.004120] Initializing cgroup subsys cpuacct [ 0.004123] Initializing cgroup subsys memory [ 0.004127] Initializing cgroup subsys devices [ 0.004129] Initializing cgroup subsys freezer [ 0.004130] Initializing cgroup subsys net_cls [ 0.004143] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004145] CPU: L2 cache: 4096K [ 0.004146] CPU: Physical Processor ID: 0 [ 0.004147] CPU: Processor Core ID: 0 [ 0.004150] mce: CPU supports 6 MCE banks [ 0.004156] CPU0: Thermal monitoring enabled (TM1) [ 0.004158] using mwait in idle threads. [ 0.004162] Performance Events: Core2 events, Intel PMU driver. [ 0.004166] ... version: 2 [ 0.004167] ... bit width: 40 [ 0.004168] ... generic registers: 2 [ 0.004170] ... value mask: 000000ffffffffff [ 0.004171] ... max period: 000000007fffffff [ 0.004172] ... fixed-purpose events: 3 [ 0.004173] ... event mask: 0000000700000003 [ 0.004176] Checking 'hlt' instruction... OK. [ 0.021721] ACPI: Core revision 20090903 [ 0.028006] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.028009] ftrace: allocating 22411 entries in 44 pages [ 0.032035] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032329] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.075285] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.076001] Booting processor 1 APIC 0x3 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 4096K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 3 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.160038] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.160044] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164051] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#2 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 4096K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU2: Thermal monitoring enabled (TM1) [ 0.252103] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.252111] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.256075] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.008000] Initializing CPU#3 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 4096K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 2 [ 0.008000] CPU3: Thermal monitoring enabled (TM1) [ 0.344039] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.344046] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.348010] Brought up 4 CPUs [ 0.348012] Total of 4 processors activated (27218.61 BogoMIPS). [ 0.349223] CPU0 attaching sched-domain: [ 0.349225] domain 0: span 0,2 level MC [ 0.349227] groups: 0 2 [ 0.349230] domain 1: span 0-3 level CPU [ 0.349231] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048) [ 0.349236] CPU1 attaching sched-domain: [ 0.349238] domain 0: span 1,3 level MC [ 0.349239] groups: 1 3 [ 0.349241] domain 1: span 0-3 level CPU [ 0.349243] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048) [ 0.349247] CPU2 attaching sched-domain: [ 0.349248] domain 0: span 0,2 level MC [ 0.349250] groups: 2 0 [ 0.349252] domain 1: span 0-3 level CPU [ 0.349253] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048) [ 0.349257] CPU3 attaching sched-domain: [ 0.349258] domain 0: span 1,3 level MC [ 0.349260] groups: 3 1 [ 0.349262] domain 1: span 0-3 level CPU [ 0.349263] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048) [ 0.349373] devtmpfs: initialized [ 0.349373] regulator: core version 0.5 [ 0.349373] Time: 20:48:26 Date: 08/17/10 [ 0.349373] NET: Registered protocol family 16 [ 0.349373] Trying to unpack rootfs image as initramfs... [ 0.349373] EISA bus registered [ 0.349373] ACPI: bus type pci registered [ 0.349373] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.349373] PCI: MCFG area at e0000000 reserved in E820 [ 0.349373] PCI: Using MMCONFIG for extended config space [ 0.349373] PCI: Using configuration type 1 for base access [ 0.349373] bio: create slab at 0 [ 0.349373] ACPI: EC: Look up EC in DSDT [ 0.355107] ACPI: Interpreter enabled [ 0.355117] ACPI: (supports S0 S3 S4 S5) [ 0.355131] ACPI: Using IOAPIC for interrupt routing [ 0.358324] ACPI: No dock devices found. [ 0.358385] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.358458] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.358460] pci 0000:00:01.0: PME# disabled [ 0.358516] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f] [ 0.358571] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.358626] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.358674] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.358711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.358714] pci 0000:00:1a.7: PME# disabled [ 0.358742] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.358775] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.358778] pci 0000:00:1b.0: PME# disabled [ 0.358827] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.358830] pci 0000:00:1c.0: PME# disabled [ 0.358880] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.358883] pci 0000:00:1c.1: PME# disabled [ 0.358932] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.358935] pci 0000:00:1c.2: PME# disabled [ 0.358980] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f] [ 0.359035] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f] [ 0.359093] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f] [ 0.359140] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.359177] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.359181] pci 0000:00:1d.7: PME# disabled [ 0.359276] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.359279] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.359282] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 0007) [ 0.359327] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907] [ 0.359331] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803] [ 0.359335] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707] [ 0.359339] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603] [ 0.359344] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f] [ 0.359348] pci 0000:00:1f.2: reg 24 io port: [0xf400-0xf40f] [ 0.359383] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffd000-0xfdffd0ff] [ 0.359394] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.359427] pci 0000:00:1f.5: reg 10 io port: [0xf200-0xf207] [ 0.359431] pci 0000:00:1f.5: reg 14 io port: [0xf100-0xf103] [ 0.359436] pci 0000:00:1f.5: reg 18 io port: [0xf000-0xf007] [ 0.359440] pci 0000:00:1f.5: reg 1c io port: [0xef00-0xef03] [ 0.359444] pci 0000:00:1f.5: reg 20 io port: [0xee00-0xee0f] [ 0.359448] pci 0000:00:1f.5: reg 24 io port: [0xed00-0xed0f] [ 0.359492] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.359499] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.359506] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.359510] pci 0000:01:00.0: reg 24 io port: [0xaf00-0xaf7f] [ 0.359515] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.359563] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.359565] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.359569] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.359599] pci 0000:00:1c.0: bridge io port: [0x9000-0x9fff] [ 0.359602] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.359606] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] [ 0.359654] pci 0000:03:00.0: reg 10 io port: [0xdf00-0xdf07] [ 0.359662] pci 0000:03:00.0: reg 14 io port: [0xde00-0xde03] [ 0.359670] pci 0000:03:00.0: reg 18 io port: [0xdd00-0xdd07] [ 0.359677] pci 0000:03:00.0: reg 1c io port: [0xdc00-0xdc03] [ 0.359685] pci 0000:03:00.0: reg 20 io port: [0xdb00-0xdb0f] [ 0.359699] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.359772] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff] [ 0.359775] pci 0000:00:1c.1: bridge 32bit mmio: [0xfd700000-0xfd7fffff] [ 0.359779] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.359829] pci 0000:04:00.0: reg 10 64bit mmio: [0xfddfc000-0xfddfffff] [ 0.359836] pci 0000:04:00.0: reg 18 io port: [0xbe00-0xbeff] [ 0.359858] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.359893] pci 0000:04:00.0: supports D1 D2 [ 0.359895] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.359898] pci 0000:04:00.0: PME# disabled [ 0.359933] pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff] [ 0.359936] pci 0000:00:1c.2: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.359940] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.359979] pci 0000:00:1e.0: transparent bridge [ 0.359982] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.359984] pci 0000:00:1e.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.360004] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.360020] pci_bus 0000:00: on NUMA node 0 [ 0.360023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.360113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.360150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.360190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.360233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.371665] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12) [ 0.371733] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.371801] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12) [ 0.371867] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.371934] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.372017] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) [ 0.372084] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12) [ 0.372151] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12) [ 0.372225] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.372227] vgaarb: loaded [ 0.372291] SCSI subsystem initialized [ 0.372305] libata version 3.00 loaded. [ 0.372305] usbcore: registered new interface driver usbfs [ 0.372305] usbcore: registered new interface driver hub [ 0.372305] usbcore: registered new device driver usb [ 0.372305] ACPI: WMI: Mapper loaded [ 0.372305] PCI: Using ACPI for IRQ routing [ 0.372305] NetLabel: Initializing [ 0.372305] NetLabel: domain hash size = 128 [ 0.372305] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.372305] NetLabel: unlabeled traffic allowed by default [ 0.372305] Switching to clocksource tsc [ 0.373465] AppArmor: AppArmor Filesystem Enabled [ 0.373471] pnp: PnP ACPI init [ 0.373476] ACPI: bus type pnp registered [ 0.374926] pnp: PnP ACPI: found 11 devices [ 0.374927] ACPI: ACPI bus type pnp unregistered [ 0.374930] PnPBIOS: Disabled by ACPI PNP [ 0.374936] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.374939] system 00:01: ioport range 0x290-0x30f has been reserved [ 0.374941] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.374946] system 00:07: ioport range 0x400-0x4bf could not be reserved [ 0.374949] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.374953] system 00:0a: iomem range 0xf0000-0xfffff could not be reserved [ 0.374955] system 00:0a: iomem range 0xcff00000-0xcfffffff could not be reserved [ 0.374957] system 00:0a: iomem range 0xcfee0000-0xcfefffff could not be reserved [ 0.374959] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.374961] system 00:0a: iomem range 0x100000-0xcfedffff could not be reserved [ 0.374963] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.374965] system 00:0a: iomem range 0xfed14000-0xfed1dfff has been reserved [ 0.374966] system 00:0a: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.374968] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.374970] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.374972] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.374974] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.409596] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.409598] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.409601] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff [ 0.409603] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.409606] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.409608] pci 0000:00:1c.0: IO window: 0x9000-0x9fff [ 0.409611] pci 0000:00:1c.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.409614] pci 0000:00:1c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 0.409619] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.409621] pci 0000:00:1c.1: IO window: 0xd000-0xdfff [ 0.409624] pci 0000:00:1c.1: MEM window: 0xfd700000-0xfd7fffff [ 0.409627] pci 0000:00:1c.1: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.409632] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.409634] pci 0000:00:1c.2: IO window: 0xb000-0xbfff [ 0.409637] pci 0000:00:1c.2: MEM window: 0xfdd00000-0xfddfffff [ 0.409640] pci 0000:00:1c.2: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.409645] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.409647] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.409650] pci 0000:00:1e.0: MEM window: 0xfda00000-0xfdafffff [ 0.409653] pci 0000:00:1e.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.409661] alloc irq_desc for 16 on node -1 [ 0.409662] alloc kstat_irqs on node -1 [ 0.409666] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.409668] pci 0000:00:01.0: setting latency timer to 64 [ 0.409674] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.409676] pci 0000:00:1c.0: setting latency timer to 64 [ 0.409682] alloc irq_desc for 17 on node -1 [ 0.409683] alloc kstat_irqs on node -1 [ 0.409685] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.409688] pci 0000:00:1c.1: setting latency timer to 64 [ 0.409693] alloc irq_desc for 18 on node -1 [ 0.409695] alloc kstat_irqs on node -1 [ 0.409697] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.409700] pci 0000:00:1c.2: setting latency timer to 64 [ 0.409704] pci 0000:00:1e.0: setting latency timer to 64 [ 0.409707] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.409708] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.409710] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.409712] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.409713] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.409715] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.409716] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.409717] pci_bus 0000:02: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 0.409719] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.409720] pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd7fffff] [ 0.409722] pci_bus 0000:03: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.409724] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.409725] pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.409726] pci_bus 0000:04: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.409728] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 0.409730] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.409731] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.409732] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.409734] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.409752] NET: Registered protocol family 2 [ 0.409810] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.409991] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.410223] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.410332] TCP: Hash tables configured (established 131072 bind 65536) [ 0.410334] TCP reno registered [ 0.410381] NET: Registered protocol family 1 [ 0.410492] pci 0000:01:00.0: Boot video device [ 0.410659] cpufreq-nforce2: No nForce2 chipset. [ 0.410674] Scanning for low memory corruption every 60 seconds [ 0.410733] audit: initializing netlink socket (disabled) [ 0.410742] type=2000 audit(1282078105.407:1): initialized [ 0.416973] highmem bounce pool size: 64 pages [ 0.416976] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.417898] VFS: Disk quotas dquot_6.5.2 [ 0.417934] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.418282] fuse init (API version 7.13) [ 0.418333] msgmni has been set to 1621 [ 0.418501] alg: No test for stdrng (krng) [ 0.418537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.418539] io scheduler noop registered [ 0.418540] io scheduler anticipatory registered [ 0.418542] io scheduler deadline registered [ 0.418565] io scheduler cfq registered (default) [ 0.418649] alloc irq_desc for 24 on node -1 [ 0.418650] alloc kstat_irqs on node -1 [ 0.418656] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.418660] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.418725] alloc irq_desc for 25 on node -1 [ 0.418726] alloc kstat_irqs on node -1 [ 0.418731] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.418737] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.418820] alloc irq_desc for 26 on node -1 [ 0.418821] alloc kstat_irqs on node -1 [ 0.418826] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.418832] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.418912] alloc irq_desc for 27 on node -1 [ 0.418913] alloc kstat_irqs on node -1 [ 0.418918] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X [ 0.418924] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.418980] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.419045] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.419102] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.419105] ACPI: Power Button [PWRB] [ 0.419138] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.419140] ACPI: Power Button [PWRF] [ 0.419171] fan PNP0C0B:00: registered as cooling_device0 [ 0.419174] ACPI: Fan [FAN] (on) [ 0.419512] ACPI: SSDT cfee8140 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203) [ 0.419650] processor LNXCPU:00: registered as cooling_device1 [ 0.419789] ACPI: SSDT cfee8600 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) [ 0.419917] processor LNXCPU:01: registered as cooling_device2 [ 0.420057] ACPI: SSDT cfee8760 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203) [ 0.420184] processor LNXCPU:02: registered as cooling_device3 [ 0.420331] ACPI: SSDT cfee88c0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203) [ 0.420458] processor LNXCPU:03: registered as cooling_device4 [ 0.464250] Freeing initrd memory: 7737k freed [ 0.819241] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.819246] ACPI: Thermal Zone [THRM] (46 C) [ 0.819318] isapnp: Scanning for PnP cards... [ 0.820098] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.820914] brd: module loaded [ 0.821198] loop: module loaded [ 0.821251] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.821315] ata_piix 0000:00:1f.2: version 2.13 [ 0.821325] alloc irq_desc for 19 on node -1 [ 0.821326] alloc kstat_irqs on node -1 [ 0.821330] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.821333] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.821359] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.821409] scsi0 : ata_piix [ 0.821455] scsi1 : ata_piix [ 0.821867] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 0.821870] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 0.821884] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.821887] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.821910] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.821942] scsi2 : ata_piix [ 0.821997] scsi3 : ata_piix [ 0.822185] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19 [ 0.822187] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19 [ 0.822258] pata_acpi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.822276] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.822286] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.822466] Fixed MDIO Bus: probed [ 0.822485] PPP generic driver version 2.4.2 [ 0.822506] tun: Universal TUN/TAP device driver, 1.6 [ 0.822507] tun: (C) 1999-2004 Max Krasnyansky [ 0.822559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.822570] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.822579] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.822581] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.822600] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.826502] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.826510] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 0.839193] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.839243] usb usb1: configuration #1 chosen from 1 choice [ 0.839260] hub 1-0:1.0: USB hub found [ 0.839264] hub 1-0:1.0: 6 ports detected [ 0.839303] alloc irq_desc for 23 on node -1 [ 0.839304] alloc kstat_irqs on node -1 [ 0.839307] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.839312] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.839314] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.839333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.843235] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.843243] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 0.855190] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.855234] usb usb2: configuration #1 chosen from 1 choice [ 0.855249] hub 2-0:1.0: USB hub found [ 0.855253] hub 2-0:1.0: 6 ports detected [ 0.855288] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.855299] uhci_hcd: USB Universal Host Controller Interface driver [ 0.855311] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.855315] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.855317] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.855338] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.855361] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.855411] usb usb3: configuration #1 chosen from 1 choice [ 0.855426] hub 3-0:1.0: USB hub found [ 0.855430] hub 3-0:1.0: 2 ports detected [ 0.855458] alloc irq_desc for 21 on node -1 [ 0.855459] alloc kstat_irqs on node -1 [ 0.855461] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.855465] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.855467] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.855484] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.855507] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.855560] usb usb4: configuration #1 chosen from 1 choice [ 0.855575] hub 4-0:1.0: USB hub found [ 0.855579] hub 4-0:1.0: 2 ports detected [ 0.855607] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.855611] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.855613] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.855632] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.855649] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 [ 0.855700] usb usb5: configuration #1 chosen from 1 choice [ 0.855716] hub 5-0:1.0: USB hub found [ 0.855720] hub 5-0:1.0: 2 ports detected [ 0.855748] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.855752] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.855754] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.855772] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.855789] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.855839] usb usb6: configuration #1 chosen from 1 choice [ 0.855856] hub 6-0:1.0: USB hub found [ 0.855859] hub 6-0:1.0: 2 ports detected [ 0.855886] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.855890] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.855892] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.855909] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.855927] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.855978] usb usb7: configuration #1 chosen from 1 choice [ 0.855993] hub 7-0:1.0: USB hub found [ 0.855996] hub 7-0:1.0: 2 ports detected [ 0.856024] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.856028] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.856030] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.856047] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.856065] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.856117] usb usb8: configuration #1 chosen from 1 choice [ 0.856132] hub 8-0:1.0: USB hub found [ 0.856135] hub 8-0:1.0: 2 ports detected [ 0.856197] PNP: No PS/2 controller found. Probing ports directly. [ 0.858949] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.858953] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.859006] mice: PS/2 mouse device common for all mice [ 0.859079] rtc_cmos 00:03: RTC can wake from S4 [ 0.859100] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.859119] rtc0: alarms up to one month, 242 bytes nvram [ 0.859181] device-mapper: uevent: version 1.0.3 [ 0.859245] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.859325] device-mapper: multipath: version 1.1.0 loaded [ 0.859327] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.859390] EISA: Probing bus 0 at eisa.0 [ 0.859411] EISA: Detected 0 cards. [ 0.859507] cpuidle: using governor ladder [ 0.859508] cpuidle: using governor menu [ 0.859777] TCP cubic registered [ 0.859868] NET: Registered protocol family 10 [ 0.860156] lo: Disabled Privacy Extensions [ 0.860361] NET: Registered protocol family 17 [ 0.860799] Using IPI No-Shortcut mode [ 0.860841] PM: Resume from disk failed. [ 0.860847] registered taskstats version 1 [ 0.861129] Magic number: 6:200:852 [ 0.861172] rtc_cmos 00:03: setting system clock to 2010-08-17 20:48:27 UTC (1282078107) [ 0.861174] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.861175] EDD information not available. [ 1.149698] ata3: SATA link down (SStatus 0 SControl 300) [ 1.160167] ata4: SATA link down (SStatus 0 SControl 300) [ 1.163213] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.172081] isapnp: No Plug & Play device found [ 1.301056] usb 1-1: configuration #1 chosen from 1 choice [ 1.307294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.307308] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.315302] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100 [ 1.316445] ata1.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 [ 1.316447] ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.331311] ata2.00: configured for UDMA/100 [ 1.332434] ata1.00: configured for UDMA/133 [ 1.332520] scsi 0:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5 [ 1.332602] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 1.332606] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.332631] sd 0:0:0:0: [sda] Write Protect is off [ 1.332633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.332648] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.332781] sda: [ 1.333365] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5 [ 1.337143] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.337145] Uniform CD-ROM driver Revision: 3.20 [ 1.337200] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.337230] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.352233] sda1 [ 1.352359] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.352370] Freeing unused kernel memory: 676k freed [ 1.352576] Write protecting the kernel text: 4836k [ 1.352627] Write protecting the kernel read-only data: 1880k [ 1.363301] udev: starting version 151 [ 1.378144] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.378172] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 1.385877] sky2 driver version 1.25 [ 1.385904] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.385914] sky2 0000:04:00.0: setting latency timer to 64 [ 1.385931] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5 [ 1.386008] alloc irq_desc for 28 on node -1 [ 1.386009] alloc kstat_irqs on node -1 [ 1.386021] sky2 0000:04:00.0: irq 28 for MSI/MSI-X [ 1.386255] scsi4 : pata_jmicron [ 1.386573] sky2 eth0: addr 00:50:8d:b7:ed:8d [ 1.389236] scsi5 : pata_jmicron [ 1.389764] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17 [ 1.389766] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17 [ 1.391019] Initializing USB Mass Storage driver... [ 1.401384] Floppy drive(s): fd0 is 1.44M [ 1.401668] scsi6 : SCSI emulation for USB Mass Storage devices [ 1.403259] usbcore: registered new interface driver usb-storage [ 1.403261] USB Mass Storage support registered. [ 1.403342] usb-storage: device found at 2 [ 1.403343] usb-storage: waiting for device to settle before scanning [ 1.421164] FDC 0 is a post-1991 82077 [ 1.611100] ata5.00: ATA-7: ST3250824A, 3.AAH, max UDMA/100 [ 1.611102] ata5.00: 488397168 sectors, multi 16: LBA48 [ 1.644157] ata5.01: ATA-7: ST3250824A, 3.AAE, max UDMA/100 [ 1.644159] ata5.01: 488397168 sectors, multi 16: LBA48 [ 1.694177] ata5.00: configured for UDMA/100 [ 1.696506] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 1.735699] ata5.01: configured for UDMA/100 [ 1.735764] scsi 4:0:0:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5 [ 1.735856] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.735866] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.735889] sd 4:0:0:0: [sdb] Write Protect is off [ 1.735891] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.735916] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.735986] scsi 4:0:1:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5 [ 1.736024] sdb: [ 1.736070] sd 4:0:1:0: Attached scsi generic sg3 type 0 [ 1.758597] sdb1 sdb2 < [ 1.758674] sd 4:0:1:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.785061] sdb5 > [ 1.785085] sd 4:0:1:0: [sdc] Write Protect is off [ 1.785087] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.785102] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.785185] sdc: sdc1 [ 1.808592] sd 4:0:0:0: [sdb] Attached SCSI disk [ 1.808675] sd 4:0:1:0: [sdc] Attached SCSI disk [ 1.866242] usb 3-2: configuration #1 chosen from 1 choice [ 1.874213] hub 3-2:1.0: USB hub found [ 1.875194] hub 3-2:1.0: 3 ports detected [ 2.116508] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 2.319483] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 2.349310] usb 4-2: configuration #1 chosen from 1 choice [ 2.434092] usb 3-2.3: new full speed USB device using uhci_hcd and address 3 [ 2.574115] usb 3-2.3: configuration #1 chosen from 1 choice [ 6.400201] usb-storage: device scan complete [ 6.400680] scsi 6:0:0:0: Direct-Access Motorola A853 0001 PQ: 0 ANSI: 2 [ 6.400950] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 6.402164] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 10.174929] udev: starting version 151 [ 10.189304] lp: driver loaded but no devices found [ 10.200923] Linux agpgart interface v0.103 [ 10.269376] Adding 9825272k swap on /dev/sdb5. Priority:-1 extents:1 across:9825272k [ 10.281947] nvidia: module license 'NVIDIA' taints kernel. [ 10.281950] Disabling lock debugging due to kernel taint [ 10.386218] type=1505 audit(1282070917.024:2): operation="profile_load" pid=616 name="/sbin/dhclient3" [ 10.386623] type=1505 audit(1282070917.024:3): operation="profile_load" pid=616 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.386840] type=1505 audit(1282070917.024:4): operation="profile_load" pid=616 name="/usr/lib/connman/scripts/dhclient-script" [ 10.770274] usbcore: registered new interface driver hiddev [ 10.783832] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 [ 10.783902] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0 [ 10.786795] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input4 [ 10.786840] generic-usb 0003:1532:0200.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Reclusa Keyboard] on usb-0000:00:1a.0-2.3/input0 [ 10.790591] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input5 [ 10.790640] generic-usb 0003:1532:0200.0003: input,hidraw2: USB HID v1.10 Device [Razer Reclusa Keyboard] on usb-0000:00:1a.0-2.3/input1 [ 10.790655] usbcore: registered new interface driver usbhid [ 10.790656] usbhid: v2.6:USB HID core driver [ 10.822691] alloc irq_desc for 22 on node -1 [ 10.822693] alloc kstat_irqs on node -1 [ 10.822697] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.822731] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.898315] hda_codec: ALC888: BIOS auto-probing. [ 10.899642] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 11.011982] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.011988] nvidia 0000:01:00.0: setting latency timer to 64 [ 11.011991] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 11.012075] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 11.258266] type=1505 audit(1282070917.894:5): operation="profile_load" pid=872 name="/usr/share/gdm/guest-session/Xsession" [ 11.259293] type=1505 audit(1282070917.894:6): operation="profile_replace" pid=873 name="/sbin/dhclient3" [ 11.259702] type=1505 audit(1282070917.894:7): operation="profile_replace" pid=873 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.259922] type=1505 audit(1282070917.894:8): operation="profile_replace" pid=873 name="/usr/lib/connman/scripts/dhclient-script" [ 11.261856] type=1505 audit(1282070917.898:9): operation="profile_load" pid=874 name="/usr/bin/evince" [ 11.266593] sky2 eth0: enabling interface [ 11.266707] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.267257] type=1505 audit(1282070917.902:10): operation="profile_load" pid=874 name="/usr/bin/evince-previewer" [ 11.270491] type=1505 audit(1282070917.906:11): operation="profile_load" pid=874 name="/usr/bin/evince-thumbnailer" [ 11.701529] ppdev: user-space parallel port driver [ 14.307680] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 14.307792] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.592504] eth0: no IPv6 routers present