2010/7/19 Corey Osgood <corey.osgood@gmail.com>

On Sun, Jul 18, 2010 at 1:11 PM, Rudolf Marek <r.marek@assembler.cz> wrote:
> Hi,
>
> I guess you need to have some driver to disconnect the bus from chipset.
> And maybe some diode not to power on whole MB while doing ISP when MB is off
> Check this:
>
> www.dediprog.com/chipset/via8237s.pdf
>
> Maybe you will need tri state buffer?

I've seen that, along with the intel version:

http://www.dediprog.com/chipset/In%20System%20Programming%20Solution%20for%20IA%20Reference%20and%20Validation%20Boards.pdf

But they rely on an SPI header and the reference design, neither of
which I'll have. I was hoping someone had some solution for hooking a
programmer directly to a board, but with switching chips so easy I
can't imagine why they'd bother.

-Corey

--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot