Hi I tried bios flashing and it ran perfectly till it verified at the end of writing the flash

C:\Users\Justin Hardy\Desktop\Flashrom_v1.2_St1cky>flashrom -w FLASH.ROM -p busp

irate_spi:dev=COM5,spispeed=1M

flashrom v1.2 on Windows 6.1 (x86_64)

flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.

Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on buspirate_spi.

Reading old flash chip contents... done.

Erasing and writing flash chip... Erase/write done.

Verifying flash... FAILED at 0x00000060! Expected=0x00, Found=0x01, failed byte

count from 0x00000000-0x003fffff: 0xc0af

Your flash chip is in an unknown state.

Please report this on IRC at chat.freenode.net (channel #flashrom) or

mail flashrom@flashrom.org, thanks!

C:\Users\Justin Hardy\Desktop\Flashrom_v1.2_St1cky>

At first I got a fail reading because I disconnected it somehow, then it worked and got this at the very end thanks!