flashrom -c W25X80 -w NT35.bin
flashrom v0.9.4-r1394 on Linux 3.0.0-16-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
Found chipset "NVIDIA MCP61".
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to flashrom@flashrom.org including a
verbose (-V) log. Thank you!
Enabling flash write... This chipset is not really supported yet. Guesswork...
SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom@flashrom.org, thanks!
Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544.
Please send the output of "flashrom -V" to flashrom@flashrom.org with
your board name: flashrom -V as the subject to help us finish support for your
chipset. Thanks.
OK.
This chipset supports the following protocols: SPI.
Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000.
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFY FAILED at 0x00011a00! Expected=0x05, Read=0xff, failed byte count from 0x00000000-0x000fffff: 0x1f8
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org with FAILED: your board name in the subject line!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!
--
Serdecznie pozdrawiam
Mariusz Cygan
Specjalista IT / Administrator / Help Desk