flashrom v0.9.4-r1451 on Linux 3.0.4-zero (i686), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1603M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 993 us, 10000 myus = 9956 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "Foxconn" DMI string baseboard-product-name: "P4M800P7MA" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "VIA VT8237" with PCI ID 1106:3227. Enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:E, 0x010000-0x01ffff:E, 0x020000-0x02ffff:E, 0x030000-0x03ffff:E, 0x040000-0x04ffff:E, 0x050000-0x05ffff:E, 0x060000-0x06ffff:E, 0x070000-0x07ffff:E Erase/write done. Restoring PCI config space for 00:11:0 reg 0x59 Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41