flashrom v0.9.4-r1451 on Linux 3.0.4-zero (i686), built with libpci 3.1.7, GCC 4.4.5, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 811M loops per second, delay more than 10% too short (got 51% of expected delay), recalculating... 1604M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 9937 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: "Foxconn"
DMI string baseboard-product-name: "P4M800P7MA"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "VIA VT8237" with PCI ID 1106:3227. Enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Reading flash... done.
Restoring PCI config space for 00:11:0 reg 0x59
Restoring PCI config space for 00:11:0 reg 0x40
Restoring PCI config space for 00:11:0 reg 0x41