flashrom v1.2 on MS-DOS 7 (i686)
flashrom was built with libpci 3.6.4, GCC 10.2.0, little endian
Command line (9 args): c:/flashrom/flashrom.exe -p internal:laptop=this_is_not_a_laptop -c AT25DF081A -VVV -r PRECISION.BIN -o LOG2.TXT
Calibrating delay loop... OS timer resolution is 60000 usecs, 1589M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 240000 myus = 270000 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
page_size=1000
pre-rounding:  start=0x000f0000, len=0x10000, end=0x00100000
post-rounding: start=0x000f0000, len=0x10000, end=0x00100000
page_size=1000
pre-rounding:  start=0x000f0450, len=0x9f5, end=0x000f0e45
post-rounding: start=0x000f0000, len=0x1000, end=0x000f1000
DMI string chassis-type: "Tower"
page_size=1000
pre-rounding:  start=0x00226450, len=0x9f5, end=0x00226e45
post-rounding: start=0x00226000, len=0x1000, end=0x00227000
page_size=1000
pre-rounding:  start=0x00226000, len=0x10000, end=0x00236000
post-rounding: start=0x00226000, len=0x10000, end=0x00236000
DMI string system-manufacturer: "Dell Inc."
DMI string system-product-name: "Precision WorkStation T3400  "
DMI string system-version: "Not Specified"
DMI string baseboard-manufacturer: "Dell Inc."
DMI string baseboard-product-name: "0TP412"
DMI string baseboard-version: "   "
Found chipset "Intel ICH9R" with PCI ID 8086:2916.
Enabling flash write... Root Complex Register Block address = 0xfeda8000
page_size=1000
pre-rounding:  start=0xfeda8000, len=0x4000, end=0xfedac000
post-rounding: start=0xfeda8000, len=0x4000, end=0xfedac000
GCS = 0x800460: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI)
Top Swap: not enabled
0x7fffffff/0x7fffffff FWH IDSEL: 0x0
0x7fffffff/0x7fffffff FWH IDSEL: 0x0
0x7fffffff/0x7fffffff FWH IDSEL: 0x1
0x7fffffff/0x7fffffff FWH IDSEL: 0x1
0x7fffffff/0x7fffffff FWH IDSEL: 0x2
0x7fffffff/0x7fffffff FWH IDSEL: 0x2
0x7fffffff/0x7fffffff FWH IDSEL: 0x3
0x7fffffff/0x7fffffff FWH IDSEL: 0x3
0x7fffffff/0x7fffffff FWH IDSEL: 0x4
0x7fffffff/0x7fffffff FWH IDSEL: 0x5
0x7fffffff/0x7fffffff FWH IDSEL: 0x6
0x7fffffff/0x7fffffff FWH IDSEL: 0x7
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
0x7fffffff/0x7fffffff FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
SPI Read Configuration: prefetching disabled, caching enabled, 
BIOS_CNTL = 0x03: BIOS Lock Enable: enabled, BIOS Write Enable: enabled
Warning: Setting BIOS Control at 0xdc from 0x02 to 0x01 failed.
New value is 0x03.
SPIBAR = 0xfe9a8000 + 0x3800
0x04: 0x8000 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=0, SCIP=0, FDOPSS=0, FDV=0, FLOCKDN=1
SPI Configuration is locked down.
Reading OPCODES... done
        OP        Type      Pre-OP
op[0]: 0xab, read  w/o addr, none
op[1]: 0xab, read  w/  addr, none
op[2]: 0x9f, read  w/o addr, none
op[3]: 0x02, write w/  addr, none
op[4]: 0x20, write w/  addr, none
op[5]: 0x02, write w/  addr, none
op[6]: 0x05, read  w/o addr, none
op[7]: 0x01, write w/o addr, none
Pre-OP 0: 0x06, Pre-OP 1: 0x06
0x08: 0x0000ffc0 (FADDR)
0x74: 0x00000000 (PR0 is unused)
0x78: 0x00000000 (PR1 is unused)
0x7C: 0x00000000 (PR2 is unused)
0x80: 0x00000000 (PR3 is unused)
0x84: 0x00000000 (PR4 is unused)
0x90: 0x04 (SSFS)
SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0
0x91: 0x007f54 (SSFC)
SSFC: SCGO=0, ACS=1, SPOP=0, COP=5, DBC=63, SME=0, SCF=0
0x94: 0x0606     (PREOP)
0x96: 0x4fc8     (OPTYPE)
0x98: 0x029fabab (OPMENU)
0x9c: 0x01050220 (OPMENU+4)
checking for opcode 0x03
Enabling hardware sequencing because some important opcode is locked.
Hardware sequencing was requested but the flash descriptor is not valid. Aborting.
FAILED!
FATAL ERROR!
Error: Programmer initialization failed.
Restoring PCI config space for 00:1f:0 reg 0xdc