Hello,

Ijust discovered this project and thought I would try it out on a spare Gigabye GA-N3050-D3P board that I had in storage. 

Unfortunately, flashing the modified image back to the board fails during the verify step. The same thing happens when I attempt to write the original BIOS back to the board, so I'm stuck with a presumably bricked board. Below is (I hope) all the relevant information you need. I've also attached the original and modified BIOS images.

Board: Gigabye GA-N3050-D3P
Chip: MX25U6435F (8192 kB)
Flashrom ver: 1.0.1
Using Raspberry Pi and Pomona 5252 for SPI interface

Verifying flash... FAILED at 0x00000010! Expected=0x5a, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0xc0d48
Your flash chip is in an unknown state.

Thanks,

Max


Sent with ProtonMail Secure Email.