It failed. I might not have the write protector connected. Is it safe to reboot?
Penagwin
flashrom v0.9.4 : d02ee0f : Nov 02 2013 00:09:09 UTC on Linux 3.4.0 (x86_64), built with libpci 3.1.10, GCC 4.7.x-google 20130114 (prerelease), little endian
Block protection could not be disabled!
Erasing and writing flash chip... spi_block_erase_20 failed during command execution at address 0x0
ERASE FAILED at 0x00400000! Expected=0xff, Read=0x00, failed byte count from 0x00400000-0x00400fff: 0x1000
ERASE FAILED!
Reading current flash chip contents... spi_block_erase_52 failed during command execution at address 0x0
ERASE FAILED at 0x00400000! Expected=0xff, Read=0x00, failed byte count from 0x00400000-0x00407fff: 0x8000
ERASE FAILED!
Reading current flash chip contents... spi_block_erase_d8 failed during command execution at address 0x0
ERASE FAILED at 0x00400000! Expected=0xff, Read=0x00, failed byte count from 0x00400000-0x0040ffff: 0x10000
ERASE FAILED!
Reading current flash chip contents... spi_chip_erase_60 failed during command execution
ERASE FAILED!
Reading current flash chip contents... spi_chip_erase_c7 failed during command execution
ERASE FAILED!
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org with FAILED: your board name in the subject line!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!
FAILED