Before I get started on the review, just a general comment or two.

If you plan to contribute in the future (which I certainly hope you will), please break submissions down into blocks of 5-10 chips.š This makes it so much easier for me, and any other reviewers, to quickly check the patch and provide feedback in a timely manner.

In the last review, I mentioned the Numonyx M45PE series (10, 20, 40, 80, 16), should only have
+ššš ššš .feature_bitsššš = FEATURE_WRSR_WREN,

set when the command is there.š It appears I may have been unclear there, because instead of removing just the WREN flag, you removed the whole line (the chips do have a Write Status Register- WRSR).

Continuing the review from Numonyx M45PE16.

Numonyx M25PX80-
+ššš ššš .voltageššš = {2700, 3600},

The datasheets I've seen have it as 2.3-3.6V (rev 4 Dec 2008 and Rev B 3/2013)

+ššš ššš .testedššš ššš = TEST_OK_PREW,

Unless I'm reading it wrong, it looks like you're adding this chip as a fully tested one- would you mind supplying some logs showing that it successfully does these operations? (write logs shouldn't contain all :S (for skipped blocks) next to the addresses).

Numonyx N25Q00AA13-

I'll admit I don't really know how this chip works, but it seems there should be a 3rd eraseblock from the description of the memory organization (datasheet is Rev E, 2/12):

Memory Configuration and Block Diagram
The memory is a stacked device comprised of four 256Mb chips. Each chip is internally
partitioned into two 128Mb segments. Each page of memory can be individually pro-
grammed. Bits are programmed from one through zero. The device is subsector, sector,
or single 256Mb chip erasable, but not page-erasable. Bits are erased from zero through
one. The memory is configured as 134,217,728 bytes (8 bits each); 2048 sectors (64KB
each); 32,768 subsectors (4KB each); and 524,288 pages (256 bytes each); and 64 OTP
bytes are located outside the main memory array.

You've got:
+ššš ššš ššš ššš .eraseblocks = { {4 * 1024, 32768 } },
+ š ššš ššš ššš .block_erase = spi_block_erase_20,
+ššš ššš ššš }, {
+ššš ššš ššš ššš .eraseblocks = { {64 * 1024, 2048 } },
+ š ššš ššš ššš .block_erase = spi_block_erase_d8,

There's a die erase opcode, which I am unfamiliar with- maybe it handles erasing a single 256Mb chip at a time?

Sanyo LF25FW203A / LE25FW203A-

Thanks so much for getting to the bottom of this chip, and figuring out which chip it actually is.

šššš ššš .probeššš ššš = probe_spi_rdid,

Maybe I'm reading the patch wrong, but you appear to be missing the .probe_timing line for this chip.

LE25FW418A, LE25FW808š and LE25FW806 -

For the LE25FW806A you included the small sector erase, but left it out for the rest of the chips- any particular reason for this?

I'll cover from Spansion S25FL128S to the end tomorrow.