I am sending the log command
# flashrom -r r_H77DS3H.F10 --programmer internal -V -o H77DS3H.log

Thank you
for your work
.

2014-11-09 14:02 GMT+05:00 Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>:
On Sun, 9 Nov 2014 14:04:55 +0600
Evgeniy Edigarev <edigarev@gmail.com> wrote:

> Hello.
> It's just a program output, but new BIOS was installed with no problems.

Hello Evgeniy,

thanks for your report!
I have added your board to our list of supported hardware and will
commit that later together with other small changes.
If possible, please always include a (verbose) log with such reports
so that we can verify them and also look for oddities that might be
interesting for our future work, thanks.

> # flashrom --programmer internal -r F7.bin
> flashrom v0.9.7-r1782 on Linux 3.16-3-amd64 (x86_64)
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OK.
> Found chipset "Intel H77". Enabling flash write... Warning: SPI
> Configuration Lockdown activated.
> OK.
> Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address
> 0xff800000.
> Trying to unmap a nonexisting mapping!
> Please report a bug at flashrom@flashrom.org
> […]

That one is known and fixed already, thanks.

--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner