flashrom 1.4.0-devel (git:v1.2-1351-g76174675) on Linux 5.10.0-25-amd64 (x86_64)
flashrom was built with GCC 10.2.1 20210110, little endian
Command line (8 args): ./flashrom -p ch341a_spi -c N25Q064..3E -o log_verify_NQ25064A13EV741.txt -v w541fb.rom
Initializing ch341a_spi programmer
Device revision is 3.0.4
The following protocols are supported: SPI.
Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: compare_id: id1 0x20, id2 0xba17
Added layout entry 00000000 - 007fffff named complete flash
Found Micron/Numonyx/ST flash chip "N25Q064..3E" (8192 kB, SPI) on ch341a_spi.
Chip status register is 0x00.
Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set
Chip status register: Block Protect 3 (BP3) is not set
Chip status register: Top/Bottom (TB) is top
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
This chip may contain one-time programmable memory. flashrom cannot read
and may never be able to write it, hence it may not be able to completely
clone the contents of this chip (see man page for details).
===
This flash part has status UNTESTED for operations: WP
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Skipping writeprotect-based unlocking for read/verify operations.
Block protection is disabled.
Verifying flash... read_flash:  region (00000000..0x7fffff) is readable, reading range (00000000..0x7fffff).
VERIFIED.