flashrom v0.9.5.2-r1546 on Linux 2.6.35-22-generic (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.7, GCC 4.4.5, little endian
Command line (1 args): ./flashrom -V
Calibrating delay loop... OS timer resolution is 1 usecs, 1406M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1007 us, 10000 myus = 10004 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Hewlett-Packard"
DMI string system-product-name: "D5468AT-ABA ALONPAV"
DMI string system-version: "1331211RE101EXPLO0"
DMI string baseboard-manufacturer: "ECS "
DMI string baseboard-product-name: "Nettle2"
DMI string baseboard-version: "1.0 "
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8726 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0x00000000
MCP SPI is not used.
Please send the output of "flashrom -V" to flashrom@flashrom.org with
your board name: flashrom -V as the subject to help us finish support for your
chipset. Thanks.
OK.
Super I/O ID 0x8726 is not on the list of flash capable controllers.
The following protocols are supported: LPC.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x5c, id2 0xcb, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH) at physical address 0xfff80000.
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH).
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88