boerni-workstation loop # /usr/local/sbin/flashrom -w 770TAUD3.F3

flashrom v0.9.2-r1017 on Linux 2.6.34 (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian

flashrom is free software, get the source code at http://www.flashrom.org

 

Calibrating delay loop... OK.

No coreboot table found.

Found ITE Super I/O, id 8720

Found chipset "AMD SB700/SB710/SB750", enabling flash write... OK.

This chipset supports the following protocols: LPC,FWH,SPI.

Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000.

===

This flash part has status UNTESTED for operations: ERASE

The test status of this chip may have been updated in the latest development

version of flashrom. If you are running the latest development version,

please email a report to flashrom@flashrom.org if any of the above operations

work correctly for you with this flash part. Please include the flashrom

output with the additional -V option for all operations you tested (-V, -Vr,

-Vw, -VE), and mention which mainboard or programmer you tested.

Thanks for your help!

===

Flash image seems to be a legacy BIOS. Disabling checks.

Writing flash chip... Erasing flash before programming... Erasing flash chip... SUCCESS.

done.

Programming flash done.

COMPLETE.

Verifying flash... VERIFIED.          

boerni-workstation loop #