I am attempting to write to a flashrom using layout/region approach.

The NOR flash size is 8MBytes. The file size I am writing is 106976 Bytes.

The rom.layout file contents are:

00000000:0001a1df test1

0001a1e0:007fffff test2

The command I am using is:

./flashrom -p ft2232_spi:type=arm-usb-ocd --layout rom.layout --image test1 -w bootloader.img

The error I am getting is :

Using region: "test1".

Calibrating delay loop... OK.

Found Eon flash chip "EN25Q64" (8192 kB, SPI) on ft2232_spi.

Error: Image size (106976 B) doesn't match the flash chip's size (8388608 B)!

Please let me know about the error.

Thanks,

Pradeep Ch.