Hi there-
I'm running a custom Thinkpad X210 motherboard, which has a Kaby Lake R on it.

The default flash chip is 8MB, and is detected as "Opaque Flash Chip" with the correct size, and it flashes correctly. It's an MX25L64

When I replace it with a larger chip (32MB in this case), the detected chip is still the same as before (Opaque flash chip, size 8MB) but the new chip is a MX25L256.

This actually works out great for using the same old images and swapping between chips, but I can't flash anything bigger if the size isn't detected correctly so it defeats the purpose of what I'm working on.

What can I try to get the chips to be detected correctly? Alternatively, are there any logs orĀ  messages I can collect that would help folks on this list add chips or debug this?

Thanks,
Rafael