Dear Stefan,

First of all thank you for responding so fast and trying to help me!

Just built checkout from svn. It outputs this result:

flashrom v0.9.3-r1288 on Linux 2.6.35-28-generic (i686), built with libpci 3.1.7, GCC 4.4.5, little endian

flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... delay loop is unreliable, trying to continue OK.

Found chipset "Intel ICH4-M", enabling flash write... OK.

This chipset supports the following protocols: FWH.

Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000.

Flash image seems to be a legacy BIOS. Disabling checks.

Erasing and writing flash chip... ERASE FAILED at 0x00016000! Expected=0xff, Read=0xae, failed byte count from 0x00016000-0x00016fff: 0xfde

ERASE FAILED!

ERASE FAILED at 0x00010000! Expected=0xff, Read=0xca, failed byte count from 0x00010000-0x0001ffff: 0xfeb2

ERASE FAILED!

Segmentatiefout

Segmentatiefout=segmentation error

I am using an Asus laptop model M6Ne, the exact type of board I don't know.

I've attached some information based on output using the following commands: flashrom -V, lspci -nnvvvxxx and superiotool -deV.

Maybe this can help you?

Again, thanks for your help.

Kind regards,

Cyrille Bartholom�e | De Damhouderestraat 20 | 2018 Antwerpen

t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com

Op dinsdag 19 april 2011 00:41:24 schreef u:

> On Mon, 18 Apr 2011 21:25:07 +0200

> Cyrille Bartholom�e <cyrille@bartholomee.com> wrote:

>

> > Dear,

> >

> > I'm facing this problem when flashing my rom:

> >

> > flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with

>

> if possible please try a newer version and provide us a verbose log

> (-V parameter). either 0.9.3 or even better compile the svn version from

> source: http://flashrom.org/Downloads

>