Hello,
I am rying to update the BIOS on my 10-yr-old laptop. Per the output of the flashrom command, I am including the output I received:
[root@Dilbert ~]# flashrom -p internal -V
flashrom v1.2 on Linux 5.8.18-350.vanilla.knurd.1.fc33.x86_64 (x86_64)
flashrom was built with libpci 3.6.4, GCC 10.2.1 20201125 (Red Hat 10.2.1-9), little endian
Command line (3 args): flashrom -p internal -V
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing internal programmer
/sys/class/mtd/mtd0 does not exist
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Notebook"
Laptop detected via DMI.
DMI string system-manufacturer: "Micro-Star International"
DMI string system-product-name: "GT680R/GX680R"
DMI string system-version: "To be filled by O.E.M."
DMI string baseboard-manufacturer: "Micro-Star International"
DMI string baseboard-product-name: "MS-16F2"
DMI string baseboard-version: "To be filled by O.E.M."
W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: 00.
Found chipset "Intel HM67" with PCI ID 8086:1c4b.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware with it,
Thank you!
Enabling flash write... Root Complex Register Block address = 0xfed1c000
Error accessing ICH RCRB, 0x4000 bytes at 0x00000000fed1c000
/dev/mem mmap failed: Operation not permitted
FAILED!
FATAL ERROR!
Error: Programmer
Can you help? Can I use this utility to flash my BIOS (I have the BIOS file from MSI)?
Mike