Happy Holidays,
So this happened: I forgot to Erase the EEPROM, which clearly is my fault, but it was late and I was tired.
Just trying to see if I can recover this EEprom at all or if I am better getting a couple of new ones from eBay?
flashrom -p ch341a_spi -E -c MX25L12835F/MX25L12845E/MX25L12865E -f
flashrom v1.1 on Darwin 19.2.0 (x86_64)
Calibrating delay loop... OK.
Found Macronix flash chip "MX25L12835F/MX25L12845E/MX25L12865E" (16384 kB, SPI) on ch341a_spi.
Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, Found=0x40, failed byte count from 0x00000000-0x00000fff: 0x1000
ERASE FAILED!
Looking for another erase function.
FAILED at 0x00000000! Expected=0xff, Found=0x40, failed byte count from 0x00000000-0x00007fff: 0x8000
ERASE FAILED!
Looking for another erase function.
FAILED at 0x00000000! Expected=0xff, Found=0x40, failed byte count from 0x00000000-0x0000ffff: 0x10000
ERASE FAILED!
Looking for another erase function.
^[[B^[[B^[[B^[[BFAILED at 0x00000000! Expected=0xff, Found=0x40, failed byte count from 0x00000000-0x00ffffff: 0x1000000
ERASE FAILED!
Looking for another erase function.
FAILED at 0x00000000! Expected=0xff, Found=0x40, failed byte count from 0x00000000-0x00ffffff: 0x1000000
ERASE FAILED!
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
No usable erase functions left.
FAILED!
Your flash chip is in an unknown state.