"
DMI string baseboard-manufacturer: "PEGATRON CORPORATION"
DMI string baseboard-product-name: "2A99"
DMI string baseboard-version: "6.01"
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Flash bus type is SPI
SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom@flashrom.org, thanks!
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0xfec80000
Mapping NVIDIA MCP6x SPI at 0x00000000fec80000, unaligned size 0x544.
SPI control is 0x0002, req=0, gnt=0
Please send the output of "flashrom -V" to flashrom@flashrom.org with
your board name: flashrom -V as the subject to help us finish support for your
chipset. Thanks.
OK.
The following protocols are supported: SPI.
Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) at physical address 0xfff00000.
Chip status register is 0x00.
This chip may contain one-time programmable memory. flashrom cannot read
and may never be able to write it, hence it may not be able to completely
clone the contents of this chip (see man page for details).
No operations were specified.