the output you really wanted
 
> Date: Tue, 7 Jul 2009 01:42:04 +0200
> From: libv@skynet.be
> To: flashrom@flashrom.org
> CC: mechwarrior5@hotmail.com
> Subject: Re: [flashrom] Asus A7V8X needs a board enable.
>
> On Mon, Jul 06, 2009 at 01:05:00PM +0200, Luc Verhaegen wrote:
> > On Sun, Jul 05, 2009 at 03:05:59PM +0200, Luc Verhaegen wrote:
> > >
> > > Glenn, please attach the output of superio -Vd, we cannot proceed
> > > without that.
> > >
> > > Luc Verhaegen.
> >
> > Glenn, please keep the list in the loop and do not break threads.
> >
> > now, you said the chip read it8703f-a, but i seem to have a hard time
> > digging anything out for this device. I for now am looking at the
> > it8702f-a datasheet.
> >
> > You were asked to attach the output of superio -Vd. This output, even
> > though it doesn't directly detect your superio, will be sufficient for
> > us to tell what is going on here. So please do so.
> >
> > Luc Verhaegen.
>
> Glen his superio output (thread got broken again) revealed that his
> IT8703F identified itself as 0x8701 0x0F on 0x2E.
>
> Attached is a quick hack for superiotool that dumps the gpio registers
> (copied from ldn 5 of 8705) to this device at ldn 7.
>
> Luc Verhaegen.

---

Hotmail® has ever-growing storage! Don’t worry about storage limits. Check it out.