As suggested in your website I am reporting a problem when trying to flash a W25Q128FV using CH341 mini programmer (black version) with a dedicated PC running Linux/Ubuntu.

I have this message displaying.

-------------------------------------------------------------------------------------------------------------

Calibrating delay loop... delay loop is unreliable, trying to continue OK.

Found Winbond flash chip "W25Q128.V" (16384 kB, SPI) on ch341a_spi.

Reading old flash chip contents... done.

Erasing and writing flash chip... Erase/write done.

Verifying flash... FAILED at 0x00b555d9! Expected=0xae, Found=0x8e, failed byte count from 0x00000000-0x00ffffff: 0x3

Your flash chip is in an unknown state.

Please report this on IRC at chat.freenode.net (channel #flashrom) or

mail flashrom@flashrom.org, thanks!

----------------------------------------------------------------------------------------------------------------

If possible I have the opportunity to use different programmer as TL866II plus, EZP2019.

I am new to Ubuntu and I am writing from Italy.

Looking forward to your reply.