flashshrom -E<br>flashrom v0.9.3-r1246 on Linux 2.6.34-12-default (i686), built with libpci 3.1.7, GCC 4.5.0 20100604 [gcc-4_5-branch revision 160292], little endian<br>flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br>
<br>Calibrating delay loop... OK.<br>No coreboot table found.<br>Found ITE Super I/O, ID 0x8712.<br>Found chipset &quot;NVIDIA NForce2&quot;, enabling flash write... OK.<br>This chipset supports the following protocols: Non-SPI.<br>
Found chip &quot;PMC Pm49FL002&quot; (256 KB, LPC,FWH) at physical address 0xfffc0000.<br>===<br>This flash part has status UNTESTED for operations: WRITE<br>The test status of this chip may have been updated in the latest development<br>
version of flashrom. If you are running the latest development version,<br>please email a report to <a href="mailto:flashrom@flashrom.org">flashrom@flashrom.org</a> if any of the above operations<br>work correctly for you with this flash part. Please include the flashrom<br>
output with the additional -V option for all operations you tested (-V, -Vr,<br>-Vw, -VE), and mention which mainboard or programmer you tested.<br>Please mention your board in the subject line. Thanks for your help!<br>Erasing and writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x22, failed byte count from 0x00000000-0x00000fff: 0xff2<br>
ERASE FAILED!<br>ERASE FAILED at 0x00000000! Expected=0xff, Read=0x22, failed byte count from 0x00000000-0x00003fff: 0x3fc2<br>ERASE FAILED!<br>ERASE FAILED at 0x00000000! Expected=0xff, Read=0x22, failed byte count from 0x00000000-0x0003ffff: 0x3b432<br>
ERASE FAILED!<br>Done.<br><div><br></div><div>---------<br></div><div>motherboard GA-7n400</div>