Hi,
first of all thank you for your flashrom software. I'm trying to read and then flash a GigaDevice GD25Q40(B), precisely the chip label is GD25Q14BT. When I run flashrom the output log show this message:
flashrom --programmer ch341a_spi -r new.bin
flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found GigaDevice flash chip "GD25Q40(B)" (512 kB, SPI) on ch341a_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading flash... done.
Please, can you tell me if I can safety probe, read erase and write?
Thank you in advance
Kind Regards Enrico Buttignol