Hi,

I was going to ask you about that. What sort of tool would you need to do that? Is there a program I can run under windows to do the trace or would i need an external USB bus analyzer?

-Josh


On Sat, Apr 27, 2013 at 6:42 PM, Stefan Tauner <stefan.tauner@student.tuwien.ac.at> wrote:
On Tue, 23 Apr 2013 10:16:27 -0600
Marc Jones <marcj303@gmail.com> wrote:

> On Tue, Apr 23, 2013 at 9:21 AM, Joshua Zarr <joshuazarr@gmail.com> wrote:
> > Hi All,
> >
> > I am using a dediprog SF100 to program the two flash chips (AT25DF321) on an
> > intel Stargo CRB. Does flashrom support programming each chip individually?
>
> I ran into the same thing. I think that the flashrom dediprog support
> needs a flag to switch the chipselect.
>

If anybody could supply us with traces of the USB traffic generated
when another CS is used, we could probably add support for it. I dont
know anything about the protocol or the vendor application but I guess
it would be rather easy to find the interesting bits by creating and
comparing dumps of two executions (e.g. the probing for a chip if that's
supported) that differ only in the selected connection.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner