Trying to use an external programmer, specifically the

TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA).
Running from a live cd of parted magic. Using flashrom v0.9.5.2-r1515.
Run command: flashrom -p ft2232_spi:type=tumpa 
get back: unknown programmer ft2232_spi:type=tumpa.
Motherboard is a MSI G41M-F.
Flashrom can see the flash chip on the board. Intel ich7
Not really used to using command prompt or linux.
I'm assuming I'm missing some usb drivers.


Any help would be greatly appreciated.