flashrom v0.9.2-r1070 on Linux 2.6.32-trunk-686 (i686), built with libpci 3.1.7, GCC 4.4.4, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 7 usecs, 148M loops per second, delay more than 10% too short (got 68% of expected delay), recalculating... 140M loops per second, delay more than 10% too short (got 65% of expected delay), recalculating... 220M loops per second, 10 myus = 12 us, 100 myus = 101 us, 1000 myus = 979 us, 10000 myus = 9872 us, 28 myus = 31 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System Manufacturer"
DMI string system-product-name: "System Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P2B-N"
DMI string baseboard-version: "REV 1.xx"
DMI string chassis-type: "Unknown"
Found chipset "Intel PIIX4/4E/4M", enabling flash write... chipset PCI ID is 8086:7110, OK.
This chipset supports the following protocols: Parallel.
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.