Habe seit kurzem ein neues Mainboard und kann den Command deshalb leider nicht ausführen. Das alte MB funktioniert aber noch.
 
MfG
Fabian
Gesendet: Samstag, 21. November 2015 um 01:39 Uhr
Von: "Stefan Tauner" <stefan.tauner@alumni.tuwien.ac.at>
An: "Fabian Hoffmann" <fab1997@gmx.net>
Cc: flashrom@flashrom.org
Betreff: Re: [flashrom] Winbond flash chip "W39V080FA" (1024 kB, FWH)
On Tue, 3 Nov 2015 14:47:37 +0100
"Fabian Hoffmann" <fab1997@gmx.net> wrote:

> Hello, you may be interested on the following log.
> My system:
> OS: Arch Linux 64-Bit
> Mainboard: ASUS P5LD2-VM/S 4.00g (MAXDATA OEM-Board, pretty rare I think. It is not listed on the ASUS page.)
> CPU: Intel Core 2 Duo E4400 @ 2 GHz
>
> Flash read went almost fine, I was able to extract the bootlogo out of the rom file, but the MD5 hash sum of the rom file didn't match with an original rom file.

Hi Fabian,

you should be able to use the code that supports other versions of the
P5LD2-VM mainboard to enable writing. Something like this:
flashrom --programmer internal:mainboard="ASUS:P5LD2-VM DH" -w modded0404.rom -o ./flashrom-write.txt
Should work, I think.

Can you please provide us with the output of the following command so
that we can add auto-detection for your version too.
lspci -nnxxxvv

The MD5 mismatch might be normal. The BIOS might use the flash memory
as persistent storage area... that is common nowadays.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner