I want to use flashrom to update the Intel DB43LD Mainboard BIOS. I have used the Intel tool to create a .BIO file and a .INI file to get the bios to the version desired and to define the default settings. It appears that flashrom should be successful even though the MB is not mentioned. I have attached the output of the ‘flashrom –VV’ command. I compiled and used the 0.9.3 release

Would you please provide any additional insight you may feel is relevant. –Thanks

________________________________________________________________________________________________________________

flashrom v0.9.3-r1205 on Linux 2.6.29 (i686), built with libpci 3.1.7, GCC 4.3.3, little endian

flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 2629M loops per second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 986 us, 10000 myus = 9834 us, 4 myus = 5 us, OK.

Initializing internal programmer

No coreboot table found.

DMI string system-manufacturer: "XXXXXXXXXXXXXXX"

DMI string system-product-name: "XXXXX"

DMI string system-version: " "

DMI string baseboard-manufacturer: "Intel Corporation"

DMI string baseboard-product-name: "DB43LD"

DMI string baseboard-version: "AAE60577-202"

DMI string chassis-type: "Desktop"

Found chipset "Intel ICH10D", enabling flash write... chipset PCI ID is 8086:3a1a,

0xfff80000/0xffb80000 FWH IDSEL: 0x0

0xfff00000/0xffb00000 FWH IDSEL: 0x0

0xffe80000/0xffa80000 FWH IDSEL: 0x1

0xffe00000/0xffa00000 FWH IDSEL: 0x1

0xffd80000/0xff980000 FWH IDSEL: 0x2

0xffd00000/0xff900000 FWH IDSEL: 0x2

0xffc80000/0xff880000 FWH IDSEL: 0x3

0xffc00000/0xff800000 FWH IDSEL: 0x3

0xff700000/0xff300000 FWH IDSEL: 0x4

0xff600000/0xff200000 FWH IDSEL: 0x5

0xff500000/0xff100000 FWH IDSEL: 0x6

0xff400000/0xff000000 FWH IDSEL: 0x7

0xfff80000/0xffb80000 FWH decode enabled

0xfff00000/0xffb00000 FWH decode enabled

0xffe80000/0xffa80000 FWH decode enabled

0xffe00000/0xffa00000 FWH decode disabled

0xffd80000/0xff980000 FWH decode disabled

0xffd00000/0xff900000 FWH decode disabled

0xffc80000/0xff880000 FWH decode disabled

0xffc00000/0xff800000 FWH decode disabled

0xff700000/0xff300000 FWH decode disabled

0xff600000/0xff200000 FWH decode disabled

0xff500000/0xff100000 FWH decode disabled

0xff400000/0xff000000 FWH decode disabled

Maximum FWH chip size: 0x100000 bytes

BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3

Root Complex Register Block address = 0xfed1c000

GCS = 0x521465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI)

Top Swap : not enabled

SPIBAR = 0xfed1c000 + 0x3800

0x04: 0xe008 (HSFS)

FLOCKDN 1, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0

0x50: 0x00001a1b (FRAP)

BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b

0x54: 0x00000000 (FREG0: Flash Descriptor)

0x00000000-0x00000fff is read-only

0x58: 0x03ff0280 (FREG1: BIOS)

0x00280000-0x003fffff is read-write

0x5C: 0x02770003 (FREG2: Management Engine)

0x00003000-0x00277fff is locked

0x60: 0x00020001 (FREG3: Gigabit Ethernet)

0x00001000-0x00002fff is read-write

0x64: 0x027f0278 (FREG4: Platform Data)

0x00278000-0x0027ffff is read-write

0x74: 0x00000000 (PR0)

0x78: 0x00000000 (PR1)

0x7C: 0x00000000 (PR2)

0x80: 0x00000000 (PR3)

0x84: 0x00000000 (PR4)

0x90: 0x00424004 (SSFS, SSFC)

0x94: 0x0006 (PREOP)

0x96: 0x043b (OPTYPE)

0x98: 0x05200302 (OPMENU)

0x9C: 0x0000019f (OPMENU+4)

0xA0: 0x00000000 (BBAR)

0xB0: 0x00004000 (FDOC)

WARNING: SPI Configuration Lockdown activated.

Reading OPCODES... done

SPI Read Configuration: prefetching disabled, caching enabled, OK.

This chipset supports the following protocols: FWH,SPI.

Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMIC A25L05PT, 64 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L05PU, 64 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L10PT, 128 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L10PU, 128 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L20PT, 256 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L20PU, 256 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L80P, 1024 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L16PT, 2048 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L16PU, 2048 KB: RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L512, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L010, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L020, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L040, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L080, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L016, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25L032, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A25LQ032, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DF081A, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25DQ161, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Atmel AT49F020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Bright BM29F040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for EMST F25L008A, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Hyundai HY29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Hyundai HY29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Hyundai HY29F040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L1635E, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Chip status register is 00

Chip status register: Status Register Write Disable (SRWD) is not set

Chip status register: Bit 6 is not set

Chip status register: Bit 5 / Block Protect 3 (BP3) is not set

Chip status register: Bit 4 / Block Protect 2 (BP2) is not set

Chip status register: Bit 3 / Block Protect 1 (BP1) is not set

Chip status register: Bit 2 / Block Protect 0 (BP0) is not set

Chip status register: Write Enable Latch (WEL) is not set

Chip status register: Write In Progress (WIP/BUSY) is not set

Found chip "Macronix MX25L3205" (4096 KB, SPI) at physical address 0xffc00000.

Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Macronix MX29F040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for MoselVitelic V29C51000B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for MoselVitelic V29C51000T, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for MoselVitelic V29C51400B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for MoselVitelic V29C51400T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for MoselVitelic V29LC51000, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for MoselVitelic V29LC51001, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for MoselVitelic V29LC51002, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for PMC Pm39LV020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for PMC Pm39LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x2f, id2 0x43, id1 is normal flash content, id2 is normal flash content

Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for SST SST25VF064C, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for SST SST25VF040.REMS, 512 KB: Invalid OPCODE 0x90

Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab

Probing for SST SST25VF040B.REMS, 512 KB: Invalid OPCODE 0x90

Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x2f, id2 0x43, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xcb, id2 0x3e, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x16. Ignoring RES in favour of RDID.

Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x16. Ignoring RES in favour of RDID.

Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x16. Ignoring RES in favour of RDID.

Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25PX32, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M25PX64, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M29F400BB, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x2f, id2 0x43, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Winbond W25Q80, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25Q16, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25Q32, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25Q64, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x16. probe_spi_rdid_generic: id1 0xc2, id2 0x2016

Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Winbond W29C040/P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for Winbond W39V040(F)B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for Winbond W39V040(F)C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for Winbond W49F002U/N, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Winbond W49F020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible.

Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible.

Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x2f, id2 0x43, id1 is normal flash content, id2 is normal flash content

Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x85, id2 0x3a, id1 is normal flash content, id2 is normal flash content

Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x74, id2 0xaf, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for AMIC unknown AMIC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.

RDID returned 0xc2 0x20 0x16 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2016