Hi Mohammed,
With regard to the EC flash failure, please see issue #38103 on the bug tracker. It might have something to do with the way the EC jumps from one copy to another.

With regard to the image size mismatch, you may need to specify which SPI ROM you are targeting using a programmer parameter.

On Wed, May 13, 2015 at 10:49 AM, Ahmed, Mohammed Rizwan <mohammed.rizwan.ahmed@intel.com> wrote:

Hello,

 

I was trying to Flash in the ec.bin and Image.bin of the WW-18 BKC,

I get the error as

“EC returned error result code 4
cros_ec_need_2nd_pass() failed. Stop
Your Flashchip is in an unknown state.

Contact flashrom@flashrom.org

Donot Reboot or Shutdown”

 

When trying to Flash with the DVT PO ec and Image provided with Servo Board

I get the Error as

“Image Size doesn’t match: Stat 4194304 bytes, wanted 524288”

 

 

I was hoping I could get some help on what to do.

 

Thanks
Mohammed Rizwan Ahmed

 


_______________________________________________
flashrom mailing list
flashrom@flashrom.org
http://www.flashrom.org/mailman/listinfo/flashrom



--
David Hendricks (dhendrix)
Systems Software Engineer, Google Inc.