Hi flashrom,

Can anyone confirm receiving this email, and if so, is there any more information from me, or assistance from you that can get the AT26DF321 written on a ICH8M HP 2510P?

Cheers,
Nando

On Thu, Nov 19, 2009 at 11:32 PM, Nando <nando4eva@gmail.com> wrote:
Hi flashrom,

I've patched the latest flashrom to allow me to dump my bios from Winbond W25x32 SPI bios chip. Strange thing is I got it to work ONCE successfully, with a dump that looks good. This worked once, in between hotswaps of the AT25DF321 chip and I haven't been able to duplicate the read again. I get an OPCODE 0x03 error with bios dump containg some data at starting few blocks followed by FFs.  Then I hotswap in a blank Atmel AT25DF321 and do a

./flashrom -w  /2510P-F0A-DUMP.ROM -V

to try to create a copy of my bios, but I get write error starting at 0x3f0000. Now can't AT26DF321 bombs out immediately. I've documented more details here. I haven't tried writing the original W25X32 but would like to with the SLIC 2.10 string which exists in the range after 0x3f0000 as would others in that linked thread.

Perhaps you can advise on how I can write that string *ONLY* into the bios? I know VPRO has some protections it can assign to the bios too, which may prevent that from happening.

Regards,
Nando