Not at all! The need for 3.3v ---> 1.8v adapter - depends not on
"Intel vs AMD", but on the model of that SPI flash chip. You see the
markings on the back of such a chip, google them, find a correct
datasheet, open it and read what's the working voltage for this chip -
3.3v or 1.8v.
On Wed, Oct 7, 2020 at 9:43 AM Clay Daniels <clay.daniels.jr(a)gmail.com> wrote:
> Nice article in general, but it also says:
> "Note: If you are flashing an AMD motherboard, you need to put the 1.8V adapter
into the SPI, and then put the clip assembly onto that."
> So is this right? 3.3v for Intel, 1.8v for AMD?
> flashrom mailing list -- flashrom(a)flashrom.org
> To unsubscribe send an email to flashrom-leave(a)flashrom.org